|
Originally Posted by nubs
(Post 15287985)
I was able to find half the part on ebay from an international seller. You may be able to find the other half through a european distributor. The problem is that a lot of them won't ship to the US.
|
I am not sure how Tamiya can force HK shops not to send to the EU? Take their sales away? That would really hurt Tamiya, because the highest sales outside Japan are from HK.
On the other hand the EU is protected by their import duties which are quite high anyway. |
Originally Posted by niznai
(Post 15288128)
I am not sure how Tamiya can force HK shops not to send to the EU? Take their sales away? That would really hurt Tamiya, because the highest sales outside Japan are from HK.
On the other hand the EU is protected by their import duties which are quite high anyway. All big players in HK (RCmart, rcjaz etc.) stopped sending out Tam parts and kits to EU. It began in their Ebay shops 1 year ago. Example: https://cimg6.ibsrv.net/gimg/www.rct...e583ac4fae.jpg This means, they cannot send it to my address. Same with RCMart. Year ago there was never a problem. |
They are so dumb. They are hurting their business by doing this.
|
Originally Posted by airbiscuit
(Post 15285472)
So the 2.5-3.0 is front? How about your rear springs?
|
Originally Posted by Macio4ever
(Post 15288193)
I use 3.0 SMJ linear on carpet and 2.8 SMJ linear on asphalt.
- Jose |
Originally Posted by airbiscuit
(Post 15287579)
Anyone knows where I can get center pulley replacement?
Or can I use any other brands that fits? https://www.modellbau-seidel.de/inde...a&best=3454936 https://www.modellbau-seidel.de/inde...a&best=3454938 |
Originally Posted by Tom1977
(Post 15288134)
I know this from 100% source. It's a fact!
[...] They really are shooting themselves in the foot. The world is trying to take down barriers and companies are trying to stick to 20th century? |
Originally Posted by airbiscuit
(Post 15287579)
Anyone knows where I can get center pulley replacement?
Or can I use any other brands that fits? The two parts you will need are: 3454938 3454936 They are $33 a piece at TamiyaUSA. |
Donath and Simon moving to Awesomatics.... noone left in Europe with great Tamiya results under “blue flag”. :(.... I will also try some other car for winter season but keep WS. IMO Change is needed to stay alive..
|
Originally Posted by Marcika
(Post 15289026)
Donath and Simon moving to Awesomatics.... noone left in Europe with great Tamiya results under “blue flag”. :(.... I will also try some other car for winter season but keep WS. IMO Change is needed to stay alive..
|
I just received my second aluminum chassis and look forward in rebuilding my 419x's thanks snopro31
|
So I noticed that the TC 7.2 has camber link spacers on bulkhead like the ones that Tamiya implemented on 419x. Also noticed that it still uses old style sway bar mounts.. wonder why they haven’t switched to the ball bearing type. |
Originally Posted by Raman
(Post 15289267)
So I noticed that the TC 7.2 has camber link spacers on bulkhead like the ones that Tamiya implemented on 419x. Also noticed that it still uses old style sway bar mounts.. wonder why they haven’t switched to the ball bearing type. |
Originally Posted by Tom1977
(Post 15288134)
I know this from 100% source. It's a fact!
All big players in HK (RCmart, rcjaz etc.) stopped sending out Tam parts and kits to EU. It began in their Ebay shops 1 year ago. Example: https://cimg6.ibsrv.net/gimg/www.rct...e583ac4fae.jpg This means, they cannot send it to my address. Same with RCMart. Year ago there was never a problem. |
| All times are GMT -7. It is currently 12:47 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.