Hot Bodies Cyclone
#8551
Tech Elite
iTrader: (11)
Originally Posted by g_mabry
Does anyone have any experience with a 3racing spool? Or any other ideas for a spool with replaceable drive cups. I'm getting tired of waiting for the WCE spool to be in stock anywhere.
#8554
Tech Adept
Originally Posted by senna555
Will version 1 heavy duty steel dogbones work with version 3 (moorespeed style) spool work together?
Thanks
Thanks
Z
#8555
Originally Posted by senna555
Will version 1 heavy duty steel dogbones work with version 3 (moorespeed style) spool work together?
Thanks
Thanks
or 3 Racing
or lightweight use 3 racing cyclone spool & outside use TAMIYA MRE Derlin Direct Cup ,
but Cup inside need change to 6.3mm & Pin area change to 2.4mm .
#8556
Titaniun CVD
Hi,
apart from TitaniumRacing , do you know somebody doing titanium CVD for thr Cyclone
thanks
Pedro
apart from TitaniumRacing , do you know somebody doing titanium CVD for thr Cyclone
thanks
Pedro
#8557
Tech Adept
why not using the WC MIPs?
#8558
brushless motor in my hara
wait a min why is my mamba motor not fitting on my motor mount,am i the only one.(help).
robert
robert
#8559
Originally Posted by barber
wait a min why is my mamba motor not fitting on my motor mount,am i the only one.(help).
robert
robert
#8560
gearing for mamba 7700 in a cyclone
jaz
wat pinion and spur are u running.
is anyone out there running a 7700 mamba in a cyclone with a 100 tooth spur.
i presently have a 33 tooth pinion and i had to remove one of the case screws on the mamba to get it to mesh with the spur and it needs to go a little closer.
wat pinion and spur are u running.
is anyone out there running a 7700 mamba in a cyclone with a 100 tooth spur.
i presently have a 33 tooth pinion and i had to remove one of the case screws on the mamba to get it to mesh with the spur and it needs to go a little closer.
#8564
Originally Posted by barber
jaz
wat pinion and spur are u running.
is anyone out there running a 7700 mamba in a cyclone with a 100 tooth spur.
i presently have a 33 tooth pinion and i had to remove one of the case screws on the mamba to get it to mesh with the spur and it needs to go a little closer.
wat pinion and spur are u running.
is anyone out there running a 7700 mamba in a cyclone with a 100 tooth spur.
i presently have a 33 tooth pinion and i had to remove one of the case screws on the mamba to get it to mesh with the spur and it needs to go a little closer.
#8565
thanks guys