Team Much-More cell master v1
#781
Originally Posted by EAMotorsports
Arun you coming up this weekend still?
EA
EA
#782
Originally Posted by yellow15
so what is a good temperature when the charging is finished?
slightly warm? 40degree C +? or ??
that's for the GP3300 or 3700..
slightly warm? 40degree C +? or ??
that's for the GP3300 or 3700..
The cells will actually raise a little in temp after charging has stopped (up to around 50-51 degrees)
#783
yellow15..
I think.. 42~45degree C is good..
When you race, 45~48degree C is also good.
If you start charge at 25~30degree C,
your Cell Master end charge approximately about 45degree C..
Of course, Stopping temp depends on outside temp.
Sorry for my poor english..
Son In-Kwon
from In-cheon, Korea.
I think.. 42~45degree C is good..
When you race, 45~48degree C is also good.
If you start charge at 25~30degree C,
your Cell Master end charge approximately about 45degree C..
Of course, Stopping temp depends on outside temp.
Sorry for my poor english..
Son In-Kwon
from In-cheon, Korea.
#785
Tech Champion
iTrader: (13)
Originally Posted by litespeed-dom
So since we are in the same region, about the same temperature, use same IB's, run the same car.... use the same charger.... what's your starting point Sush!?
Dom
Dom
-Korey
#786
orion advantage
i was thinking og getting one of thease , some questions .
1) the orion one looks a copy of this , which one is better and why ?
2) is there any new upto date profiles for the ctx charge for
5mins, 6 cells, GP 3700 ,
3) do the orion profiles work or can they be used on this ?
i see hara uses the orion version and sets it to 5 cells !
do you have to / or can you use this profile on the much more ?
just not to sure one which one to buy , honest answer would be nice
and not just because its a much-more thread, thanks...
1) the orion one looks a copy of this , which one is better and why ?
2) is there any new upto date profiles for the ctx charge for
5mins, 6 cells, GP 3700 ,
3) do the orion profiles work or can they be used on this ?
i see hara uses the orion version and sets it to 5 cells !
do you have to / or can you use this profile on the much more ?
just not to sure one which one to buy , honest answer would be nice
and not just because its a much-more thread, thanks...
#787
Originally Posted by Sushi Boy
I use the nexus racing profiles when step charging, and adust the last step charging amps for punch as needed. For the liniear charge I put it at 07 or 08 with the lock out on, with a temp cut of 48-49 deg.
-Korey
-Korey
From what people are saying bout the NEXUS settings for the IB3800s ON CTX i found that i have to set the peak setting WAY higher...but that is just me....
#788
Originally Posted by Bluecow
i was thinking og getting one of thease , some questions .
1) the orion one looks a copy of this , which one is better and why ?
2) is there any new upto date profiles for the ctx charge for
5mins, 6 cells, GP 3700 ,
3) do the orion profiles work or can they be used on this ?
i see hara uses the orion version and sets it to 5 cells !
do you have to / or can you use this profile on the much more ?
just not to sure one which one to buy , honest answer would be nice
and not just because its a much-more thread, thanks...
1) the orion one looks a copy of this , which one is better and why ?
2) is there any new upto date profiles for the ctx charge for
5mins, 6 cells, GP 3700 ,
3) do the orion profiles work or can they be used on this ?
i see hara uses the orion version and sets it to 5 cells !
do you have to / or can you use this profile on the much more ?
just not to sure one which one to buy , honest answer would be nice
and not just because its a much-more thread, thanks...
#789
Originally Posted by Nexus Racing
No problem, James .
It has been said that NiCDs perform best with a linear charge. The charging rate is entirely up to you...just don't melt your connectors .
As a general rule:
Lower charging rate=more run-time, less power
Higher charging rate=more power, less run-time
NiCD's also like higher delta peak settings. I would start with an 09 or 10 setting.
Additionally, a stick pack has more resistance in its connections. This can cause a false peak, especially in combination with lower delta peak settings, so you will probably want to set a long-lockout for the first 10-15 minutes of charge.
It has been said that NiCDs perform best with a linear charge. The charging rate is entirely up to you...just don't melt your connectors .
As a general rule:
Lower charging rate=more run-time, less power
Higher charging rate=more power, less run-time
NiCD's also like higher delta peak settings. I would start with an 09 or 10 setting.
Additionally, a stick pack has more resistance in its connections. This can cause a false peak, especially in combination with lower delta peak settings, so you will probably want to set a long-lockout for the first 10-15 minutes of charge.
#790
I just picked up a integy 16X8 charger. I tried step charging and it seems like my batteries are not taking the MiAh that they did when I charged with a constant amps. Has anyone noticed a drop like this?
#792
Originally Posted by Rob Phillips
I haven't had those results with my CTX. The Miah has been cosistant from what I have seen. I not to familar with the Integy chargers though.
#793
Would anyone have some inputs or profiles for Stock 27/23turn specific ctx charging?
GP3300
IB3600
IB3800
(loose cells)
Any tips would greatly be appreciated
GP3300
IB3600
IB3800
(loose cells)
Any tips would greatly be appreciated
#794
Tech Initiate
Is anyone experiencing problems with just a normal peak charge?
Whenever I use the CTX charge it seems to work fine and my battery packs take a good charge, however if I just use the peak charge it always cuts off at between 500mah - 800mah
Whenever I use the CTX charge it seems to work fine and my battery packs take a good charge, however if I just use the peak charge it always cuts off at between 500mah - 800mah
#795
I have tested with 15V supply. The Li/Po charger still stop charging at half way. I don't really know what to do anymore.