Section 8

Should I use composite dogbones on a one way with a stock motor?

Also, since the outdrives on the one way are metal, I suppose using the dogbones with pin cusions is pointless?

Thanks

AssocRacer

iTrader: (10)

the combination of metal outdrives and composite dogbones really isn't good. I had the plastic outdrives with a front diff and i kept breaking the composite outdrives, so i started using the aluminum ones.

RCpurplecow

iTrader: (1)

use the aluminum ones. the outdrives on the oneway are steel.

HARDRIVE

Sup guys need a big help here

I have a rtr tc4 bought it for drift
But my friends upgraded their tamiya to novak brushless motors so were playing drag racing for onroad cars now
I bought my self a MM7700 for this tc4
W/ fm radio ofcourse

My question is

What battery should I run this brushless?
Please don't say lipo
I'm looking for at leas 6 cells only cause my old charger can only charge 4 to 6 cells
Any ideas?

Do I need to change any parts on this tc4 rtr/ since this MM7700 is fast?

Thanx guys

overflow

iTrader: (8)

you will melt the plastic outdrives... i know from experence. get the steel ones and cvd's! as for batteries i used some smc 4200's. worked fine for me.

HARDRIVE

Thanx over flow
I have smc 3800 will it work for the time being? How many minutes is your run with the 4200smc?

I'm picking up outdrive and
Cvd's after work. Are this parts made specialy for tc4 rtr? Like an upgrade?

B4Bandit

iTrader: (10)

3800's will be fine. They will feel like theyare newer with the brushless set up!!

All TC4 parts are interchangeable

trackdesigner71

iTrader: (6)

Hey guys,

I know the TC5 is gonna be the hot ticket soon but I just got a used TC4 and what is a good baseline carpet setup for it?

Kraig

iTrader: (81)

foam or rubber tires?

RCpurplecow

iTrader: (1)

purple springs in the front. blue in the back. 60wt oil all around.

trackdesigner71

iTrader: (6)

Foam. I know Im a little behind the times but I try to get what I can within my budget due to the limited means I have with my school job. Hopefully in the fall I will have enough to really step things up

RCpurplecow

iTrader: (1)

you should start saving up for a tc5, that's what i'm doing. i'm still gonna use my tc4 for a while though

HARDRIVE

My local hobby stores don't have it
Do you know where I can order this parts?
Or the parts #
Would be helpful
I'm having trouble programing my mamba on my computer. Do you know if I have to connect my remote on the esc?
I tried it lastnight and its says something about the remote so I couldn't set my esc

Thanx guys

bigair78

Hey guys,

Thanks for all the help. I am getting out of racing. If anyone is in need of a nice backup roller (Factory team edition) I am trying to get rid of mine. I will let it go pretty reasonable. It's on ebay and in the for sale forums.

Thanks again. You guys saved me a few times.

Josh

http://www.rctech.net/forum/showthre...93#post3336993

http://cgi.ebay.com/ws/eBayISAPI.dll...7664&rd=1&rd=1

HARDRIVE

Hey guys any
Is there a cover for the spur gear for the tc4?
Tiny rocks eating my gears need a cover for it anybody knows wherei can get one?
I don't know why ae didn't put a cover on it