Serpent S411
#4173
#4175
Tech Regular
Spur and Pinions for S411
Which brands do you suggest?
Needs to be 48DP
Have to make FDR3.5/4.0/4.25/4.5.
Don't mean how many teeth, I mean which brands would fit and are durable?
Needs to be 48DP
Have to make FDR3.5/4.0/4.25/4.5.
Don't mean how many teeth, I mean which brands would fit and are durable?
#4178
Tech Addict
iTrader: (38)
Yup, Serpent spur gears would be my choice for 48 pitch. I'm pretty much covered on them as I was working on my off-road stuff shortly before ordering spurs and ended up ordering every 48 pitch spur they had. After a bit of measuring and checking I found that the latest CRC spurs for 12th scale fit the car as well so mine is now using an 88 tooth CRC spur. I did have to use 1mm spacers on the screws as the CRC is thinner in that area and also a button head on the rear motor mount because the CRC teeth are a bit wider. Overall everything looks good though and I will be driving it this weekend.
#4179
Tim, whats the specs on the top plate on the Sport? It looks like a glass plate, will if fit a regular S411? How thick is it?
Thanks
Any Serpents going to IIC?
Thanks
Any Serpents going to IIC?
#4180
Tech Champion
iTrader: (15)
I'll take it off and make sure it lines up, but I am 95% it will. What is differerent, is that there is no hole even drilled for the motor mount screw.( to be clear.. the hole in the top deck., but it is not in the mount itself. )
I though people would have picked up on the split blocks in the rear...
I though people would have picked up on the split blocks in the rear...
Last edited by TimPotter; 09-14-2012 at 02:04 PM.
#4181
Thanks