R/C Tech Forums - Team Associated TC6 Thread

Yes that body will work it is at a touring car. No you can use stock setup for the shocks. I love gt racing I try to convert as many nubies I try to turn them on to gt racing.

I got these tires, HPI 26mm Low Profile Super Radial Tire (Super Compound) I plan to just initially just whip her around the neighborhood streets and parking lots, are these good for that ? I didnt know if "drift" tires would mean zero traction or if they allow you to drive normal and do a nice power slide when you choose?

vivo quevas

08-14-2013 10:08 AM

Quote:

Originally Posted by Graham11 (Post 12446611)

TThose tire will be perect but don't put too much front chamber on your car those tire seem to wear the onside shoulder with over 1' of chamber. Invest in a decent chamber gauge.

Graham11

08-14-2013 10:19 AM

Quote:

Originally Posted by vivo quevas (Post 12446653)

TThose tire will be perect but don't put too much front chamber on your car those tire seem to wear the onside shoulder with over 1' of chamber. Invest in a decent chamber gauge.

I have camber/toe/ride height gauges for offroad, will I need all new for on road, Also, what type of screws are on TC6 hex or philips and metric or what?

vivo quevas

08-14-2013 12:19 PM

Quote:

Originally Posted by Graham11 (Post 12446680)

I have camber/toe/ride height gauges for offroad, will I need all new for on road, Also, what type of screws are on TC6 hex or philips and metric or what?

I don't know about toe and camber gauge but i would think it would work. A TC6 has hex screws.

dizope

08-14-2013 01:22 PM

Quote:

Originally Posted by Graham11 (Post 12446680)

I have camber/toe/ride height gauges for offroad, will I need all new for on road, Also, what type of screws are on TC6 hex or philips and metric or what?

Mostly 2mm hex heads.

YoDog

08-14-2013 03:19 PM

Yes... mostly 2mm hex but some of the 1.5mm hex screws are a bit loose so they fit a 1/16 hex better. Your guages should be ok in a pinch.

-jacob-

08-15-2013 12:02 AM

Finished both projects finally

http://i50.photobucket.com/albums/f3...psc2ff72dc.jpg

http://i50.photobucket.com/albums/f3...ps0c489610.jpg

http://i50.photobucket.com/albums/f3...psfd9c48cd.jpg

- team smurf

Mr.juarez

08-15-2013 12:23 AM

YOU FORGOT TO PAINT YOUR WHEELS BLUE!!!! :lol:
that's at least couple tenths off from that!!

JustWill75

08-15-2013 05:35 AM

HEY THAT'S MY PAINT SCHEME

http://i589.photobucket.com/albums/s...5/IMAG0684.jpg

TC6.1 and TC4

RussF

08-15-2013 08:24 AM

Quote:

Originally Posted by -jacob- (Post 12449009)

Finished both projects finally

What kind of car is the little one?

cdwilliams1

08-15-2013 11:30 AM

Quote:

Originally Posted by YoDog (Post 12447557)

Yes... mostly 2mm hex but some of the 1.5mm hex screws are a bit loose so they fit a 1/16 hex better. Your guages should be ok in a pinch.

Agreed on the 1/16. It was the only way I could get the ones holding the spur gear loose.

Does the AE titanium screw set fit any better?

YoDog

08-15-2013 11:47 AM

Quote:

Originally Posted by cdwilliams1 (Post 12450495)

Agreed on the 1/16. It was the only way I could get the ones holding the spur gear loose.

Does the AE titanium screw set fit any better?

You definatley want to change those screws out to cap heads ASAP. They will strip out very soon. I keep a supply on hand for all my local guys running the TC6. I got them from Mc Mastaer Carr. The size is M2.5 x 8mm socket cap head screw. I ordered like 100 in SS for about 6 bucks.

Hebiki

08-15-2013 11:52 AM

Quote:

Originally Posted by RussF (Post 12449903)

What kind of car is the little one?

cdwilliams1

08-15-2013 12:28 PM

Quote:

Originally Posted by YoDog (Post 12450535)

Thanks for the tip. Just ordered a bag for myself.

veecee

08-15-2013 06:53 PM