|
Originally Posted by Razathorn
(Post 15445246)
What I ended up with is going from 5/4 down stop to 7/6 (2mm less travel) and 0 degrees camber all the way around. I was able to match my best fast lap ever with this setup.
|
Originally Posted by trigger
(Post 15443924)
Side by side comparison of the J-Zero to the P-Zero:
- J rear wing sits lower than the P but has a more aggressive angle of attack. - P hood is slung lower than the J(had to raise my body posts) - J is roughly 10-12 grams lighter. The P has thicker lexan. |
Originally Posted by Kodey65
(Post 15445683)
What are your impressions on the track?
|
Originally Posted by trigger
(Post 15445829)
Got a chance to run it this past weekend. The body handles very nice. Car felt planted and had plenty of initial steering. I mounted it roughly 6mm forward like I usually do. Did not get a chance to run a comparison back to back, needed to change ballast as the J-zero is lighter. Definitely a good thing now as the weight can be added down low where it should be. But It feels equally competitive as the P-zero. Looks fast on track too!
What is the actual weight you are getting on your J-Zero? Every P-Zero I’ve painted/ran comes in at least than 100g. With the numbers you’d posted, your body would weigh between 80-85g, but my math or base numbers could be off. |
Originally Posted by theproffesor
(Post 15445991)
What is the actual weight you are getting on your J-Zero? Every P-Zero I’ve painted/ran comes in at least than 100g. With the numbers you’d posted, your body would weigh between 80-85g, but my math or base numbers could be off. J-zero weight- 82g- 2 coats of paint with decals. |
https://cimg3.ibsrv.net/gimg/www.rct...6eb0cc0e0a.jpg
This is a Tamiya raikirii GT the non lightweight version with the steel body pins holding in the mirrors and the rear wing and all the decals and about three coats of paint and Window Tint 133g |
|
https://cimg0.ibsrv.net/gimg/www.rct...4c913b52ad.jpg
And I do this with it, car number 5, what is that 1 one 100th off TQ..... clip the corner marker and wound up on my lid😬 you can be fast with most body as long as you set the car up around it, and you can look good too....... now I am in the process of doing up one of the new J-Zero with molded Wing mirrors and a nice decal set I'm very curious to see how it will perform I'll post pics weight and give a performance update soon to follow😁 |
Wow this thing really is lighthttps://cimg4.ibsrv.net/gimg/www.rct...f40ab1155e.jpg
|
|
This will definitely go down as one of my all-time favorite bodies:nod: exotek hit it out of the park with this one:D
|
|
https://cimg8.ibsrv.net/gimg/www.rct...96e18d602d.jpg
Hits 96 grams with three coats of paint one coat of window tint, and the decals which are rather heavy |
|
That's a very good paint job and body.
|
| All times are GMT -7. It is currently 06:17 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.