I want a set of clear cases... where can I get some??? hehe... My EvoIV is mainly for TCS racing too. So i try to get as much lightweight Tamiya parts as I can. Ti axles might be nice. As for input shafts, get the rear aluminum input shaft. And get the aluminum drive cup for it. Then for the front, you can either get the one piece drivecup input shaft deal. Or the front aluminum input shaft and an aluminum drive cup.

A set or two of tuned springs. A set of tuned sway bars. A 5.5 shim kit. Another diff for the front end. Some extra toe blocks are a must. I ran 1X/1B (415blocks) front and A/B rear for the TCS at the RCO.

hmmmm... clear cases? how about the blue/clear? i wound up with extras of both i think.... all that stuff has been packed away for now.

TB Evolution IV MS
 

My name is Masa and I work for RC Adviser Champ. We have received TB Evolution IV MS. Here is a price for it.

TB Evolution IV MS Standard price 62790Yen Discount price 34540Yen

TB Evolution IV MS with titanium screw set Discount price 38500Yen

TB Evolution IV MS with Titanium screw and Aluminium blue screw set Discount price 38500Yen.

If you guys are interesting to order this, please mail to [email protected] We also have other items with super discount price.

Thank you
Masa

No way man, One-ways 4-Life :nod:

Is the MS version coming with the extra suspension blocks and swaybars like the 415ms?

Nope
the MS comes with the following blocks
1XB
1D
1A
1A

and it comes with the same Med silver sway bars that came with the EVO4
-Dave:sneaky:

So are they all that it comes with?? I presume that means that it has swept arms at the front then??

Yep thats all that it comes with.....:sweat:
as far as the front and rear

Front
1A
1A

Rear
1XB
1D
with the 0deg hubs you get 3deg total..

-Dave:sneaky:

Oh okay.... fair enough. Interesting that its using 415 blocks. I was going to do that to my Evo before I Sold it.

Also one more funny thing is that they kit uses 3mm shims under the front and rear camber links too.??? with another 2mm shim on top of the rear hub..??:weird: kind of different fron the EVO4 Box set up...anyways it drives much better out of the box:D
-Dave:sneaky:

Yeh, the rear hub thing is the same as what comes with the aluminium rear uprights I believe. The other stuff on the camber links is different from Kit setup though, interesting.

Gear cases
 

If anyone is looking for the clear/blue/smoke gear cases, I saw some on ebay last night. They are in Jasons store. Check them out. They were around $15 if I remember correctly.

SETUP QUESTIONS?
 

I have a couple of setup questions that someone might be able to help me with:

What does sweeping the front arm back do?

What does changing the width of the Front or Rear with 4mm vs. 5mm vs. 6mm Wheel hubs?

What does raising the support blocks do vs. stacking less spacers under upper inner link?

Hi Guys,

our first shipment of EVO IV MS has arrived:

Tamiya EVO IV MS and for a limited time, the $399.99 price will include a titanium screw kit

Steve Wang

Hi guys
I looking to get a new car and I am trying to choose between the EVo IV MS and the Xray. I have a couple questions about the car. A couple guys at my local track have the EVO IV and have had problems with the bevel input gear for the oneway stripping. Is this normally just a case of inproper shimming? Would boiling the gears like the the Pro 4 help with this problem? They are stripping a gear every week or two and at $6 set it gets pretty expensive. One of the guys even swithced to a front diff because of the problem. They have also had a some tweak problems with the original car, do the new bulkheads cure this? I have read what you need to do to run foams, but the with the chassis only being 2.6mm is the car stiff enough to be competitive with the other cars out there?
Thanks
David