trackdesigner; I don't if there is a nice way to put this, but don't use a P2K2 if you can help it. Use a Monster or CO.

best, .22 on crt

Anyone run the new Parma HD speed 8 yet? I'm waiting for my lhs to get some in to try.

HD is awsome. Good for two tenths at my local track :nod:

I won & TQ'ed the 2nd leg of our NW Indoor Carpet Series at Peel-It in Marysville, Wa a couple of weeks ago with one in 19t class. I ran a Speed 8 all through practice and screwed on a fresh HD in the first heat. I actually thought that it pushed just a "tick" more then the 8 which would explain the High Downforce part of the body. I cut the little vents out to let the air up and out. That body was provided by Korey Harbkey via Paul. Korey was not able to run 12th that weekend, so I was the lucky dog. I thought the body had a good feeling across the board and did not seem to get that steering expo feeling like the 8 does. My first impression of the 8 was the slower you went, the more it turned in... the faster you went, the more it pushed. That might just be me.

I bought another and I am dripping paint across it as we speak. I have another series race this weekend in Tri-Cities and then in Minot, ND the next. I plan on having this one with me!


I ran my new MS2.3A tonight at Rain City. The new steering rack seemed to work very well. At one point, I was on track record pace held by Trav Schreven (that little fast dude!) but failed to pull it off. By the end of the evening, the car was about as good as it gets. The Flex Plate kept the lap times low, the steering did what was required of it.

What a hardcore... Minot, ND.... :nod:

1/12 is tough in Minot. Not hundreds of racers, just fast racers. you'll dig it.

the bumper is from kawada 3000 ( sorry, I don't know what car is that ).

I can tolerate adding few grams for safety.

...plus Bob and I for comic relief!

Scottrik

Ok Thanks man. I have a couple of Monsters in my box so how would you gear one of those? same situation...

My home track size is 85x40, roll out is about 1.65", 767 or F's full, red/red on the spring. They will be always slightly better to undergear then over. Good luck.

I believe the foam bumper is from yokomo

I'm sure the Kawada and Yokomo bumpers are fine, but I've found parts can be difficult to obtain from these companies. Slapmaster has a nice foam bumper that should be easy to get, if he still makes it. Perhaps Brian can post whether it is available and how to order. :cool:

Any details on the Minot race...I am about 5 hours NE of Minot and may be interested in driving down for a weekend.

I just notice your signature.........

Nice TEAMS you got there :lol: :lol:

Dude...... yesterday night at my girlfriend home, ...... I give some little test with GTB 3.5R + Paragon . The car is awesome even on marble floors. I can give full throttle @45 degree steering without spin !!! I can hear the tires were squealing but no circling :sneaky: ...... cool ya :D