Schumacher Corner
Does anyone have a oneway they want to sell?
Originally Posted by wyd
Kevin nice looking car.
Tech Champion
iTrader: (4)
I just got back from a Florida State Race in West Palm Beach. It was on an old bumpy outdoor hockey rink that was asphalt with a layer of latex roller hockey surface and a liberal dose of VHT...in other words...MONDO TRACTION!
Schumacher swept the race with a win in Stock (Jeff Flasig), TQ'd and win in 19T (Troy Schafer), and a win in Mod (Troy again).
It was a very cool race as you has as much traction as on carpet (I saw a few cars traction roll) but you had to keep the suspension soft for all the bumps.
A big thanks to Tim Potter, MDI racing and FSEARA for putting on a great race!
Schumacher swept the race with a win in Stock (Jeff Flasig), TQ'd and win in 19T (Troy Schafer), and a win in Mod (Troy again).
It was a very cool race as you has as much traction as on carpet (I saw a few cars traction roll) but you had to keep the suspension soft for all the bumps.
A big thanks to Tim Potter, MDI racing and FSEARA for putting on a great race!
Tech Regular
iTrader: (4)
Adrain, Can you post or pm the setup that the team was using at the MDI race?? Thanks a bunch.
Tech Champion
iTrader: (4)
Originally Posted by rcdougie
Adrain, Can you post or pm the setup that the team was using at the MDI race?? Thanks a bunch.
I will post them tomorrow...
Tech Master
iTrader: (16)
Haha I ran at Peel-it last friday for some asphalt practice, and I'm pretty sure there wasn't any less traction there than the novak race ! It was nuts. There was so much grip the car seemed to keep turning and never square out of the corner like it had too much steering, yet at the same time it could push off the track . I think the problem is the huge building its in keeps all the rain off it . Needless to say I didn't change anything on the car so I didn't dial my self out of every other asphalt track out there .
Tech Champion
iTrader: (17)
Sounds like SoCal We just tired something pretty radical last week there. Super low roll centers, slightly stiffer springs, and no swaybars with a spool. Massive steering along with the major grip. We did have guys traction rolling a number of times and tires were completely shot after 2 runs. One guy actually ripped a tire right on the edge at the sidewall.
Tech Master
iTrader: (16)
Haha thats like foam tire setup. Yeah if I were to dial my car in at Peel-it I know I would end up with some really funky stuff on it. Probably run a oneway or a diff to smooth things out there and give better off throttle steering. Stiffen the front spring... 1mm droop... who knows !
Tech Champion
iTrader: (32)
Originally Posted by mini-dub
Haha thats like foam tire setup. Yeah if I were to dial my car in at Peel-it I know I would end up with some really funky stuff on it. Probably run a oneway or a diff to smooth things out there and give better off throttle steering. Stiffen the front spring... 1mm droop... who knows !
Tech Champion
iTrader: (32)
Originally Posted by roadrashracing
Does anyone have a oneway they want to sell?
Tech Champion
iTrader: (17)
Just finished getting the Reedy Race car ready to rock.
Tech Master
iTrader: (16)
I have a broken oneway you can have ? But I'm keeping the working one .
Hey Jon what are the numbers like on the packs Eric sent you? I wanna know what to expect .
Hey Jon what are the numbers like on the packs Eric sent you? I wanna know what to expect .
Tech Master
iTrader: (5)
Jon, thats is one sexc car which mine looked that good.
what fan is that over your motor and the heat sink to?
just looking at buying one and that looks like a good set up
thanks in advance and my car is still wandering can figure it out
what fan is that over your motor and the heat sink to?
just looking at buying one and that looks like a good set up
thanks in advance and my car is still wandering can figure it out
Tech Regular
Originally Posted by aus jd 2703
Jon, thats is one sexc car which mine looked that good.
what fan is that over your motor and the heat sink to?
just looking at buying one and that looks like a good set up
thanks in advance and my car is still wandering can figure it out
what fan is that over your motor and the heat sink to?
just looking at buying one and that looks like a good set up
thanks in advance and my car is still wandering can figure it out
jon: do u no that part number for your ajusters on your shocks? im guessing ther the tamiya ones?
Tech Champion
iTrader: (4)
John - I'd like to know who makes that heatsink too.