Originally Posted by aus jd 2703

hey guys ive been having trouble with snapping axles ive snapped 2 in very light contacts (corner dots) is there any options for stronger axles?
what could cause this? any suggestions

Originally Posted by aus jd 2703

hmmm thanks guys but its on the front and i like the narrow width is there any stronger options that dont increase width?

Originally Posted by aus jd 2703

hmmm thanks guys but its on the front and i like the narrow width is there any stronger options that dont increase width?

Originally Posted by skypilot

thanks for that.

btw, any shouie guys - driving - to pavement nationals, just a little heads up, i won't be packing any type of liquids for the flight and will be bugging you guys for hand outs, also not bringing a soldering iron. not complaining about my borrowing stuff will get you a drink, or some sort of food of your choice.

or i may just buy it at the track and give it away after the race depending on how much you drink/eat.

Originally Posted by JayBee

Marcos da Prophet!!

Originally Posted by JayBee

Saweet!!

Originally Posted by JayBee

Hey guys real quick- When Randy Caster ran the Tamiya 414 pulley for overdrive, anyone know how he got the front belt to tighten up?

Originally Posted by Marcos.J

here it is JayBee!! (thanks to fellow teammate TonyP for the picture)

Originally Posted by slammin

You can come borrow some stuff from me if need be .Since its only a 2 hour drive for me I going to pull my trailer up with me. And will I have it stocked with plenty of supplys.By the way I like Mt. Dew.

Originally Posted by Marcos.J

414 is a 32t pulley i think you will need a shorter belt like a 169t or a 167 t hpi belt to get the correct tension but thats a lot of overdrive i think he probably meant was the 415 pulley thats 35t, i think thats why Schumacher released the 35t pulley. i think a 1.6 ratio in the front is alot.

Originally Posted by skypilot

thanks.

Originally Posted by Marcos.J

414 is a 32t pulley i think you will need a shorter belt like a 169t or a 167 t hpi belt to get the correct tension but thats a lot of overdrive i think he probably meant was the 415 pulley thats 35t, i think thats why Schumacher released the 35t pulley. i think a 1.6 ratio in the front is alot.