Schumacher Corner
R/C Tech Elite Member
iTrader: (37)
Just a note the number for the MI3 strap is U3222, the U2985 is for the MI2EC
Tech Champion
iTrader: (42)
Tech Champion
iTrader: (17)
Doug...thanks for letting me know who's body going to T-BONE next week. Please show me your TA body as well, so I can remember...
P.S...again, nice paint job, but I like your photo skill more.
P.S...again, nice paint job, but I like your photo skill more.
Tech Champion
iTrader: (31)
Tech Elite
iTrader: (75)
Tech Champion
iTrader: (31)
Last edited by JayBee; 01-28-2008 at 09:58 PM.
Tech Champion
iTrader: (31)
Last edited by JayBee; 09-12-2008 at 09:34 PM.
Tech Champion
iTrader: (31)
Hey guys what do the U3221 wheel hexes look like?
Tech Elite
iTrader: (30)
Wow Adrian way to slam! Yea the graphite pieces are already out as to the other items they would be nice but in my opinion not necesary ...I know that car driving varies driver by driver and in accordance with their driving style, but for me right out of the box the XXX-S was faster than my $700.00 hopped up Axis 2.
Tech Elite
iTrader: (75)
Super Moderator
iTrader: (239)
Super Moderator
iTrader: (239)
Tech Champion
iTrader: (4)
Was that really random or am I missing something?
Regional Moderator
iTrader: (9)
The NiMh center was yanked out (it's easy to remove, just flex the strap a bit and twist) and the strap was put bacl on when I realized how underweight the car was with a LiPo. I actually had a 3600 in there before, but it's lighter than the 4800, so I stuffed the Platinum in.
The battery is taped in, then the strap to keep it from moving around at all. I used 1mm washers under the posts to get a snug fit, but with the tape, it's not crucial to have it fit so tight.
The weights are tungsten pinewood derby weights, taped to the side and the front of the pack. The car is still a hair under 1500g, so it needs more. I don't particularly like the taped on weights, so I'm considering designing a brass tray for LiPos to fit into the slots of the Mi3 (pops is a machinist ).
The battery is taped in, then the strap to keep it from moving around at all. I used 1mm washers under the posts to get a snug fit, but with the tape, it's not crucial to have it fit so tight.
The weights are tungsten pinewood derby weights, taped to the side and the front of the pack. The car is still a hair under 1500g, so it needs more. I don't particularly like the taped on weights, so I'm considering designing a brass tray for LiPos to fit into the slots of the Mi3 (pops is a machinist ).
Oh, and btw, I mailed off those universals to you today. You'll know them when you see them, the envelope has "Attn: Adam Bailey" on the top and was printed with a printer cartridge thats obviously on its last leg!
Tech Champion
iTrader: (31)
Adrian, did you get my PM yesterday?