Xray T1
#676
Tech Initiate
p2k2 pro gearing
Any recommendations on gearing for a p2k2 pro motor? This
will be used on a medium size asphalt track..
Btw, Anyone know other than Xray's xstore where I pick up
xray spurs & pinion gears?
Thanks in advance!!
will be used on a medium size asphalt track..
Btw, Anyone know other than Xray's xstore where I pick up
xray spurs & pinion gears?
Thanks in advance!!
#677
Re: p2k2 pro gearing
Originally posted by pisnonvtec
Any recommendations on gearing for a p2k2 pro motor? This
will be used on a medium size asphalt track..
Btw, Anyone know other than Xray's xstore where I pick up
xray spurs & pinion gears?
Thanks in advance!!
Any recommendations on gearing for a p2k2 pro motor? This
will be used on a medium size asphalt track..
Btw, Anyone know other than Xray's xstore where I pick up
xray spurs & pinion gears?
Thanks in advance!!
More info please. What are the track dimensions, roughly guess at it? What is the layout like, technical? Traction?
I run on a rather large track and I initially run 83/29, Takeoff rubber. Anything less and I will not run with the big dogs. 90/27 may be a good starting point for you.
Grab your spares from Buster:
Call Buster at 703-430-2202.
Mon,Tue,Thur 2pm-9pm
Wed, Fri 10am-6pm
Last edited by RCCadet; 02-14-2002 at 01:54 PM.
#678
Tech Initiate
RCCadet,
Thanks!!
The racing will be done on smooth asphalt. Regarding the layout
and dimension, It will be decided the morning of the event (Which really sucks..) I called and that's all I could get from them. I will
be entering stock class.
Btw for those in the bayarea it will
be held at Castle Hobbies in San Jose.
Thanks!!
The racing will be done on smooth asphalt. Regarding the layout
and dimension, It will be decided the morning of the event (Which really sucks..) I called and that's all I could get from them. I will
be entering stock class.
Btw for those in the bayarea it will
be held at Castle Hobbies in San Jose.
Last edited by pisnonvtec; 02-14-2002 at 02:41 PM.
#679
Tech Elite
iTrader: (16)
Well,
I finally made the move and picked up an XRAY. Just got done building it, and I have to say, the fit and finish of this kit should be a lesson to manufacturers everywhere. VERY impressive.
First race day will likely be this weekend, foams on ozite, semi bumpy fairly low grip track. The XRAY has gotten a bit of a bad rep around here, I'm hoping to disprove the doomsayers...
Trips
I finally made the move and picked up an XRAY. Just got done building it, and I have to say, the fit and finish of this kit should be a lesson to manufacturers everywhere. VERY impressive.
First race day will likely be this weekend, foams on ozite, semi bumpy fairly low grip track. The XRAY has gotten a bit of a bad rep around here, I'm hoping to disprove the doomsayers...
Trips
#680
Originally posted by Trips
Well,
I finally made the move and picked up an XRAY. Just got done building it, and I have to say, the fit and finish of this kit should be a lesson to manufacturers everywhere. VERY impressive.
First race day will likely be this weekend, foams on ozite, semi bumpy fairly low grip track. The XRAY has gotten a bit of a bad rep around here, I'm hoping to disprove the doomsayers...
Trips
Well,
I finally made the move and picked up an XRAY. Just got done building it, and I have to say, the fit and finish of this kit should be a lesson to manufacturers everywhere. VERY impressive.
First race day will likely be this weekend, foams on ozite, semi bumpy fairly low grip track. The XRAY has gotten a bit of a bad rep around here, I'm hoping to disprove the doomsayers...
Trips
E-mail Ralph Burch for his setup. I understand that he had his A-Main hands down until a minor scuff with a pipe, he did TQ his race!!
Great to have you aboard Trips! Show them how it is done.
#681
Trips-
Did you get rid of your XXX-S like I did to run the X-Ray or do you still have both cars? I bought mine on Wednesday and am going to build it over the weekend. Can't wait to run it.
Mike Webb
Did you get rid of your XXX-S like I did to run the X-Ray or do you still have both cars? I bought mine on Wednesday and am going to build it over the weekend. Can't wait to run it.
Mike Webb
#682
Tech Elite
iTrader: (16)
I still have the XXX-S, and a Mission as well. I plan to sell two of the three cars soon, I just have to decide which I like best...
I'll most likely have the XRAY out for its debut on Sunday.
I don't think Ralph's setup will be of much use at my local track, team setups don't work here for any cars, my belief is that most team setups are developed on smooth high bite tracks, and our track is anything but... it's somewhat bumpy, the caarpet is so worn that the floor is showing through in some spots, and theres so much loose fuzz that the cars come off the track after a heat looking like they need a shave...
DG, you probably remember that I worked with Ralph for a couple of months at Mike's in Carrollton before he left to go to Serpent USA... we're still in touch, but I haven't told him that I got the car yet... I'll be talking to him after the Ft. Myers race this week, maybe we can come up with a good "low grip crappy old carpet" setup for the car... LOL
Trips
I'll most likely have the XRAY out for its debut on Sunday.
I don't think Ralph's setup will be of much use at my local track, team setups don't work here for any cars, my belief is that most team setups are developed on smooth high bite tracks, and our track is anything but... it's somewhat bumpy, the caarpet is so worn that the floor is showing through in some spots, and theres so much loose fuzz that the cars come off the track after a heat looking like they need a shave...
DG, you probably remember that I worked with Ralph for a couple of months at Mike's in Carrollton before he left to go to Serpent USA... we're still in touch, but I haven't told him that I got the car yet... I'll be talking to him after the Ft. Myers race this week, maybe we can come up with a good "low grip crappy old carpet" setup for the car... LOL
Trips
#684
Congrats Trip!
But, You are missing a screw on the front bumper, the one that is underneath the car. I have Xray vision you know
What batteries are those? I know they are SMH, but what brand?
But, You are missing a screw on the front bumper, the one that is underneath the car. I have Xray vision you know
What batteries are those? I know they are SMH, but what brand?
#688
A nitro version from Xray would be a conflict of interest!!!
#689
Serpent is the nitro version
#690
Originally posted by RCCadet
No, haven't heard anything, but I asked if TeamXRAY had plans of one when this thread was on RCTouring.com.
No, haven't heard anything, but I asked if TeamXRAY had plans of one when this thread was on RCTouring.com.