KO PROPO EX-10 Helios q's
#976
I'm going to buy the Helios radio. But first I wanted to know if it is compatable with the HiTech 625mg analog servo? I know it works with analog KO servos, just not sure about the HiTech.
And does anybody have any glitching with this radio? How about while using a personal transponder.
thanks
chad
And does anybody have any glitching with this radio? How about while using a personal transponder.
thanks
chad
#977
Buttons on/off
I have a questio regarding the ET4, ET5 and BT1 buttons on the Helios.
I am using these buttons for some adjustment functions.
Problem is, I always move these buttons by accident even when I'm driving coz they're just too near my thumb. Any quick way to turn these buttons on and off? I know I can turn them off at the "Setup" menu but is there a quicker way?
Cheers...
I am using these buttons for some adjustment functions.
Problem is, I always move these buttons by accident even when I'm driving coz they're just too near my thumb. Any quick way to turn these buttons on and off? I know I can turn them off at the "Setup" menu but is there a quicker way?
Cheers...
#978
Tech Elite
iTrader: (9)
Originally posted by Pro4Capece
I'm going to buy the Helios radio. But first I wanted to know if it is compatable with the HiTech 625mg analog servo? I know it works with analog KO servos, just not sure about the HiTech.
And does anybody have any glitching with this radio? How about while using a personal transponder.
thanks
chad
I'm going to buy the Helios radio. But first I wanted to know if it is compatable with the HiTech 625mg analog servo? I know it works with analog KO servos, just not sure about the HiTech.
And does anybody have any glitching with this radio? How about while using a personal transponder.
thanks
chad
I mounted my PT on top my servo just yesterday.
No problem glitching. before and after Spektrum.
Hope this helps,
Stephen <><
#979
Tech Adept
The 625MG did NOT work with my helios, not even in über-slow mode, no HSR and 3-channel. I had to borrow a KO digital servo for the weekend when i forst got the Helios. I got my on now of course.......
#980
does anyone know which shottky comes with the vfs-1 pro ?
the singele oder double side shottky ?
the singele oder double side shottky ?
#981
How do you reset the uptimer? I can't seem to find the reset location.
#982
Tech Master
Originally posted by TC3
does anyone know which shottky comes with the vfs-1 pro ?
the singele oder double side shottky ?
does anyone know which shottky comes with the vfs-1 pro ?
the singele oder double side shottky ?
#983
Tech Master
Originally posted by axel
How do you reset the uptimer? I can't seem to find the reset location.
How do you reset the uptimer? I can't seem to find the reset location.
-Robert
#984
The resetting can be very tricky if you don't know the trick When reseting, start with the up-button and then hold down the down too.
If you miss the up and press the down just a little before the up you will come to the next menu...
If you miss the up and press the down just a little before the up you will come to the next menu...
#986
Tech Master
Originally posted by JDXray
i see you can make custom rings, and it shows you all the notes/beats. Does anyone know where i can get the actually notes to set it up, lol. It will be kinda hard to just put the notes in and wing it.
i see you can make custom rings, and it shows you all the notes/beats. Does anyone know where i can get the actually notes to set it up, lol. It will be kinda hard to just put the notes in and wing it.
-Robert
#987
Tech Elite
iTrader: (3)
Originally posted by KO PROPO Staff
Do a google search. Look up music notes or music riff notes. There are a lot of free notes out there. Lots of times its not the whole entire song, but just a sample. You can't put an entire song in the melody for the radio anyways.
-Robert
Do a google search. Look up music notes or music riff notes. There are a lot of free notes out there. Lots of times its not the whole entire song, but just a sample. You can't put an entire song in the melody for the radio anyways.
-Robert
#988
Hi I just got a ex-10 radio system, this thing is awesome! I also bought a ko-propo 2363 digital servo, I would like to mount my transponder on top of my servo, due to limited space for electronics. Ive heard people having glitching problems when they do this? Does anybody know if this would be OK to do?
Thanks
Thanks
#989
Tech Elite
iTrader: (9)
Originally posted by kylehirano
Hi I just got a ex-10 radio system, this thing is awesome! I also bought a ko-propo 2363 digital servo, I would like to mount my transponder on top of my servo, due to limited space for electronics. Ive heard people having glitching problems when they do this? Does anybody know if this would be OK to do?
Thanks
Hi I just got a ex-10 radio system, this thing is awesome! I also bought a ko-propo 2363 digital servo, I would like to mount my transponder on top of my servo, due to limited space for electronics. Ive heard people having glitching problems when they do this? Does anybody know if this would be OK to do?
Thanks
Stephen <><
#990
Thanx for the info, I scrolled up the page and found people talking about this subject, guess I should of looked. Oh well.
KO-PROPO EX-10 rules
KO-PROPO EX-10 rules