KO PROPO EX-10 Helios q's
#226
Originally posted by KO PROPO Staff
Just slightly cheaper, about $50.
Just slightly cheaper, about $50.
#228
Tech Regular
iTrader: (3)
Advanced HSR
Hey guys, I just got my Helios yesterday and LOVE IT! I'm kinda confused on the HSR though. I race last night and today with my radio set at factory defaults, which apparently is Advanced HSR mode. Now from what I've read, I should have fried my servos, and possibly one of my recievers (or at least had problems with them). I'm using the following: KR-302F w/ KO 2113, KR-302F w/ 94357, and JR RS300 w/ KO 2123, and my radio set in Advanced HSR mode! I thought I'd have problems if I did this?
The only reason I noticed because I was trying to turn on AHSR a couple of minutes ago by using my KO 2123 servo with a 302F reciever, and I took off the module on the Helios to find it already set to high speed mode (towards the top, according to the manual), and the channels set to 2. From what I can tell in the manual I've been running AHSR with incompatable equipment...and no problems that I know of so far.
Whats up with this?
The only reason I noticed because I was trying to turn on AHSR a couple of minutes ago by using my KO 2123 servo with a 302F reciever, and I took off the module on the Helios to find it already set to high speed mode (towards the top, according to the manual), and the channels set to 2. From what I can tell in the manual I've been running AHSR with incompatable equipment...and no problems that I know of so far.
Whats up with this?
#229
Is the mars-R wheel avaliable as a spare part?
#230
Originally posted by tomlau
Is the mars-R wheel avaliable as a spare part?
Is the mars-R wheel avaliable as a spare part?
#231
Tech Master
Re: Advanced HSR
Originally posted by psbarger
Hey guys, I just got my Helios yesterday and LOVE IT! I'm kinda confused on the HSR though. I race last night and today with my radio set at factory defaults, which apparently is Advanced HSR mode. Now from what I've read, I should have fried my servos, and possibly one of my recievers (or at least had problems with them). I'm using the following: KR-302F w/ KO 2113, KR-302F w/ 94357, and JR RS300 w/ KO 2123, and my radio set in Advanced HSR mode! I thought I'd have problems if I did this?
The only reason I noticed because I was trying to turn on AHSR a couple of minutes ago by using my KO 2123 servo with a 302F reciever, and I took off the module on the Helios to find it already set to high speed mode (towards the top, according to the manual), and the channels set to 2. From what I can tell in the manual I've been running AHSR with incompatable equipment...and no problems that I know of so far.
Whats up with this?
Hey guys, I just got my Helios yesterday and LOVE IT! I'm kinda confused on the HSR though. I race last night and today with my radio set at factory defaults, which apparently is Advanced HSR mode. Now from what I've read, I should have fried my servos, and possibly one of my recievers (or at least had problems with them). I'm using the following: KR-302F w/ KO 2113, KR-302F w/ 94357, and JR RS300 w/ KO 2123, and my radio set in Advanced HSR mode! I thought I'd have problems if I did this?
The only reason I noticed because I was trying to turn on AHSR a couple of minutes ago by using my KO 2123 servo with a 302F reciever, and I took off the module on the Helios to find it already set to high speed mode (towards the top, according to the manual), and the channels set to 2. From what I can tell in the manual I've been running AHSR with incompatable equipment...and no problems that I know of so far.
Whats up with this?
#232
Tech Master
Originally posted by tomlau
Is the mars-R wheel avaliable as a spare part?
Is the mars-R wheel avaliable as a spare part?
#234
Tech Master
As long as they are the same frequency (27mHz xtals in 27mHz radio)
#235
Tech Master
Originally posted by HarshGuy
This is probably an obvious answer, but want to double check, I have a mars R with a *ton* of rx/tx chrystals, will my crystals work with this new rx/tx?
This is probably an obvious answer, but want to double check, I have a mars R with a *ton* of rx/tx chrystals, will my crystals work with this new rx/tx?
#236
KO PROPO Staff,
Does shortening the servo wires void the warranty? I have some appropriate connectors and I just want to check. Thanks.
Does shortening the servo wires void the warranty? I have some appropriate connectors and I just want to check. Thanks.
#237
Tech Master
Originally posted by forty6
KO PROPO Staff,
Does shortening the servo wires void the warranty? I have some appropriate connectors and I just want to check. Thanks.
KO PROPO Staff,
Does shortening the servo wires void the warranty? I have some appropriate connectors and I just want to check. Thanks.
#238
are the modules the same for the mars, mars r, and helios. what I am asking is are they compatable. If I take my mars 27 and put in my helios?
#239
Tech Master
Originally posted by theisgroup
are the modules the same for the mars, mars r, and helios. what I am asking is are they compatable. If I take my mars 27 and put in my helios?
are the modules the same for the mars, mars r, and helios. what I am asking is are they compatable. If I take my mars 27 and put in my helios?