TA-05 ver.2
#2596
Tech Elite
iTrader: (38)
Join Date: Jan 2015
Location: Hilagang-Silangan, Estados Unidos
Posts: 2,917
Trader Rating: 38 (100%+)
that looks just like mine - minus the aluminum motor brace thing and the rear bulkhead
I got mine used and it was the V2R chassis, so it came with a good bit of hop-ups...i've slowly added the steering parts, the front IFS bulkhead, the rocker arms...gear diffs front and rear (1M up front and 1k in the rear)
its a great car - i would have used it for VTA (as Gizzbob said), but i couldn't find a gearing combo that allowed me to run low enough FDR for vta here..
I got mine used and it was the V2R chassis, so it came with a good bit of hop-ups...i've slowly added the steering parts, the front IFS bulkhead, the rocker arms...gear diffs front and rear (1M up front and 1k in the rear)
its a great car - i would have used it for VTA (as Gizzbob said), but i couldn't find a gearing combo that allowed me to run low enough FDR for vta here..
With the time and money I spent here, I could have easily gotten a modern touring car.
I will be using the IFS bodies of course like the Axio and HSV. Bodies will be box art.
This build is for self fulfillment. This car feeds my soul...
Some pics for you...
Note: There is an RCTECH member who has NIP rear bulkheads for sale.
#2597
Very nice build. I like. I have never been disapointed by the handling of these tamiya cars.
Yes it is a great car. I finally got mine redone with ALL the Tamiya brand hop-ups. I didn't miss anything I think. Including the carbon reinforced chassis. I ordered parts from all over the world.
With the time and money I spent here, I could have easily gotten a modern touring car.
I will be using the IFS bodies of course like the Axio and HSV. Bodies will be box art.
This build is for self fulfillment. This car feeds my soul...
Some pics for you...
Note: There is an RCTECH member who has NIP rear bulkheads for sale.
With the time and money I spent here, I could have easily gotten a modern touring car.
I will be using the IFS bodies of course like the Axio and HSV. Bodies will be box art.
This build is for self fulfillment. This car feeds my soul...
Some pics for you...
Note: There is an RCTECH member who has NIP rear bulkheads for sale.
#2598
Tech Elite
iTrader: (38)
Join Date: Jan 2015
Location: Hilagang-Silangan, Estados Unidos
Posts: 2,917
Trader Rating: 38 (100%+)
#2599
Tech Champion
iTrader: (30)
Yes it is a great car. I finally got mine redone with ALL the Tamiya brand hop-ups. I didn't miss anything I think. Including the carbon reinforced chassis. I ordered parts from all over the world.
With the time and money I spent here, I could have easily gotten a modern touring car.
I will be using the IFS bodies of course like the Axio and HSV. Bodies will be box art.
This build is for self fulfillment. This car feeds my soul...
Some pics for you...
Note: There is an RCTECH member who has NIP rear bulkheads for sale.
With the time and money I spent here, I could have easily gotten a modern touring car.
I will be using the IFS bodies of course like the Axio and HSV. Bodies will be box art.
This build is for self fulfillment. This car feeds my soul...
Some pics for you...
Note: There is an RCTECH member who has NIP rear bulkheads for sale.
I like the Axio body, ran it on my TT01 and its a good body... the last time I ran mine (and will continue, until i get something else), I ran the GTR body... felt really good, even with the plastic 'pretty' wing (not the racing wing. I've since got my hands on one of the racing wings and that's on the body - so hopefully the next time a TCS event is near me, it'll be good
here are a copy shots of mine - during the 2014 Southern Nationals, i ran it USGT and before I got the aluminum rocker arms
and in its concourse-only body
#2600
Tech Elite
iTrader: (38)
Join Date: Jan 2015
Location: Hilagang-Silangan, Estados Unidos
Posts: 2,917
Trader Rating: 38 (100%+)
if you could, can you PM me the guy selling the bulkhead?
I like the Axio body, ran it on my TT01 and its a good body... the last time I ran mine (and will continue, until i get something else), I ran the GTR body... felt really good, even with the plastic 'pretty' wing (not the racing wing. I've since got my hands on one of the racing wings and that's on the body - so hopefully the next time a TCS event is near me, it'll be good
here are a copy shots of mine - during the 2014 Southern Nationals, i ran it USGT and before I got the aluminum rocker arms
and in its concourse-only body
I like the Axio body, ran it on my TT01 and its a good body... the last time I ran mine (and will continue, until i get something else), I ran the GTR body... felt really good, even with the plastic 'pretty' wing (not the racing wing. I've since got my hands on one of the racing wings and that's on the body - so hopefully the next time a TCS event is near me, it'll be good
here are a copy shots of mine - during the 2014 Southern Nationals, i ran it USGT and before I got the aluminum rocker arms
and in its concourse-only body
What bumper is that?
PM sent.
#2601
Tech Champion
iTrader: (30)
yeah... i love those wheels - would love to find a way to get another set
like I said, I got lucky and scored a barely used V2r kit... just had to replace all the screws (original owners used blue AE screws, and not the metric AE stuff ) and rebuild the whole thing
mine's not quite 100% TCS Japan legal - have some non-tamiya titantium screws in the bottom, but other than them, its all 100% Tamiya parts
i even found a way to better fit a cooling fan (thanks to some leftover axial parts ) so now its even more ready...
maybe this weekend, i'll snap some newer naked pics of the chassis!
like I said, I got lucky and scored a barely used V2r kit... just had to replace all the screws (original owners used blue AE screws, and not the metric AE stuff ) and rebuild the whole thing
mine's not quite 100% TCS Japan legal - have some non-tamiya titantium screws in the bottom, but other than them, its all 100% Tamiya parts
i even found a way to better fit a cooling fan (thanks to some leftover axial parts ) so now its even more ready...
maybe this weekend, i'll snap some newer naked pics of the chassis!
#2602
Tech Elite
iTrader: (38)
Join Date: Jan 2015
Location: Hilagang-Silangan, Estados Unidos
Posts: 2,917
Trader Rating: 38 (100%+)
Yes please do post pics here!
I am glad that after all these years, there are some of us who still like the TA05.
The equal belt design is what I really like about it plus the abundance of parts.
Many options in building too. Budget build, 3racing build, Ultimate build, etc.
I tried looking at the TA06 but can't find myself to buy one.
Maybe the TA07?
I am glad that after all these years, there are some of us who still like the TA05.
The equal belt design is what I really like about it plus the abundance of parts.
Many options in building too. Budget build, 3racing build, Ultimate build, etc.
I tried looking at the TA06 but can't find myself to buy one.
Maybe the TA07?