TA-05 ver.2
#2566
Tech Elite
iTrader: (38)
Join Date: Jan 2015
Location: Hilagang-Silangan, Estados Unidos
Posts: 2,917
Trader Rating: 38 (100%+)
Did somebody mention my name?
#2567
Tech Elite
iTrader: (38)
Join Date: Jan 2015
Location: Hilagang-Silangan, Estados Unidos
Posts: 2,917
Trader Rating: 38 (100%+)
Hi all..
I new this hobby RC 1/10..
I just brought TAMIYA TA05 ver2 just done building...
hope any best recommended setup on road high speed..
1.chassis setup
2.ESC,Motor,Heat sink,
3.Damper
4.Servo
5.Battery and Charger
6.Pinion,Spur,Moter Gear
7.Tire and Wheel
8.Radios and Receiver
I new this hobby RC 1/10..
I just brought TAMIYA TA05 ver2 just done building...
hope any best recommended setup on road high speed..
1.chassis setup
2.ESC,Motor,Heat sink,
3.Damper
4.Servo
5.Battery and Charger
6.Pinion,Spur,Moter Gear
7.Tire and Wheel
8.Radios and Receiver
In addition, I'd like to share these links:
https://www.tamiyausa.com/articles/t...e#.VgGW9PlVhBd
https://www.tamiyausa.com/articles/l...test_setup.pdf - set up sheet
You said high speed road? Like parking lot runs? or do you plan to race it?
#2568
Yeah, no problem and thanks for the follow through. I worked on my M-Four last night and re-did the rear diff oil weight so ordered more of those Kyosho o-rings since I was down to my last pack. It's real handy to have a a couple of those 37T pulley oil diffs for quick swaps with different oil weights. I use AE oil and have 100k, 50k, 10k, 7k, 5k, 3k diffs on hand
#2569
Super Moderator
iTrader: (2)
I'm sure Sagadsetup, aka Mr. TA05 will confirm but the stock v2 came with ball diffs I believe.
Here is a good place for info to get started:
http://www.petitrc.com/reglages/tami...TamiyaTA05.htm
And finally, there's already a TA05 thread to answer all your questions:
http://www.rctech.net/forum/electric...ing-sedan.html
Here is a good place for info to get started:
http://www.petitrc.com/reglages/tami...TamiyaTA05.htm
And finally, there's already a TA05 thread to answer all your questions:
http://www.rctech.net/forum/electric...ing-sedan.html
#2570
Tech Elite
iTrader: (38)
Join Date: Jan 2015
Location: Hilagang-Silangan, Estados Unidos
Posts: 2,917
Trader Rating: 38 (100%+)
Nowadays it's hard to find a TCS legal full hopped up TA05 V2. The bulkheads alone are difficult to find. IF you do find it, it's pricey.
Even the carbon reinforced chassis is nowhere to be found...
Even the carbon reinforced chassis is nowhere to be found...
#2574
Tech Elite
iTrader: (38)
Join Date: Jan 2015
Location: Hilagang-Silangan, Estados Unidos
Posts: 2,917
Trader Rating: 38 (100%+)
It's part number 53990. I have been searching hi and low for these parts.
I did find one from ewippler but it's gold.
I am actually tempted to buy it. My TA05 will turn out to be blue-gold. Lol.
I wouldn't mind as long as it's TCS legal.
Gotta save for it...
I did find one from ewippler but it's gold.
I am actually tempted to buy it. My TA05 will turn out to be blue-gold. Lol.
I wouldn't mind as long as it's TCS legal.
Gotta save for it...
#2575
Tech Rookie
Hi guy...
can TAMIYA TA05 VER2 change to drift car..?? if can..
which part must change...thx very much..
can TAMIYA TA05 VER2 change to drift car..?? if can..
which part must change...thx very much..
#2576
Tech Champion
iTrader: (136)
http://shopping.rcmodel.hk/parts-ep-...d-p-11129.html
http://www.fusionhobbies.com/product...inium-bulkhead
http://tamiya-au.com/shop/en/86969-t...-bulkhead.html
http://skybluehobby.com/catalog/prod...head+(%2353990)
https://translate.google.com/transla...87&prev=search
http://dynamic.carletontechnologies....90&data=Tamiya
i found the above, but they may be out of stock or too expensive.
http://www.fusionhobbies.com/product...inium-bulkhead
http://tamiya-au.com/shop/en/86969-t...-bulkhead.html
http://skybluehobby.com/catalog/prod...head+(%2353990)
https://translate.google.com/transla...87&prev=search
http://dynamic.carletontechnologies....90&data=Tamiya
i found the above, but they may be out of stock or too expensive.
#2577
Tech Elite
iTrader: (38)
Join Date: Jan 2015
Location: Hilagang-Silangan, Estados Unidos
Posts: 2,917
Trader Rating: 38 (100%+)
Ouch...
Thanks for the input @MD.
Which of these shops are the "most reliable" to buy from? Not including fusion hobbies.
Thanks for the input @MD.
Which of these shops are the "most reliable" to buy from? Not including fusion hobbies.
#2578
Tech Elite
iTrader: (38)
Join Date: Jan 2015
Location: Hilagang-Silangan, Estados Unidos
Posts: 2,917
Trader Rating: 38 (100%+)
1. Buy a set of drift wheels and tires
2. Remove drive belt in front.
3. Add more negative camber front and rear
That's for starters only. You can further enhance your car's performance buy buying more parts to which I don't have much knowledge of.
Enjoy.
#2580
Tech Elite
iTrader: (38)
Join Date: Jan 2015
Location: Hilagang-Silangan, Estados Unidos
Posts: 2,917
Trader Rating: 38 (100%+)
If I had a full hopped up TCS legal TA05 V2, I'd keep it... To me, it's one of Tamiya's greatest cars.