57LikesThe Speed Passion Thread
10-28-2010 | 10:42 AM
#5911
Joined: Sep 2002
Posts: 9,295
From: Chicago Illinois USA
10-28-2010 | 10:44 AM
#5912
The new optional power cap would be the one to use for stock racing.
http://www.speedpassion.net/us/produ...8802-C01&c=OPT
I notice a difference, not sure about everyone else though. The ESC will generally run a little cooler, and low-mid range throttle response will improve.
-Korey
http://www.speedpassion.net/us/produ...8802-C01&c=OPT
I notice a difference, not sure about everyone else though. The ESC will generally run a little cooler, and low-mid range throttle response will improve.
-Korey
10-28-2010 | 08:55 PM
#5914
Tech Regular
Joined: Apr 2007
Posts: 472
From: 9th Island
I'm having trouble trying to download the 508 no timing software to my new GT2.1 EX. I hooked up the LCD programming box to the computer and speed controller, plug in the battery and when I turn on the speed controller nothing happens, what I'm I doing wrong?
10-29-2010 | 07:52 AM
#5916
I have the GT V2.1 EX and GT 2.1 Prostock ESC’s with LCD box and am wondering which software to download. Do I use 5/11 V1.33 or 7/8 V1.33 with 100528 for both esc’s? Is 5/11 V1.33 not to be used since 7/8 came out. The driver patch from 7/21 would not be used for the non Silver Arrow ESC’s? Both ESC’s are for 17.5t motors.
10-29-2010 | 09:29 AM
#5917
Tech Addict
iTrader: (14)
Joined: Mar 2010
Posts: 711
From: Connecticut
Can't say enough about the cirtix stock club esc and 17.5 v3 motor. It's drop in and go for RCGT, and easy to set up even for people as new as myself to b/l stuff. Loving this combo. I can truly say that I beat the living hell out of my car yesterday, esc never got over 90 degrees and motor never even hit 100. Running 4.25 FDR on a Tamiya ta05 v2. Gave nothing on the straight to any cars out there.
10-29-2010 | 11:25 AM
#5918
Tech Adept
iTrader: (7)
Joined: Jan 2010
Posts: 237
Can't say enough about the cirtix stock club esc and 17.5 v3 motor. It's drop in and go for RCGT, and easy to set up even for people as new as myself to b/l stuff. Loving this combo. I can truly say that I beat the living hell out of my car yesterday, esc never got over 90 degrees and motor never even hit 100. Running 4.25 FDR on a Tamiya ta05 v2. Gave nothing on the straight to any cars out there.
10-29-2010 | 11:42 AM
#5919
Joined: Jan 2004
Posts: 5,058
From: Rockville, MD
10-29-2010 | 07:55 PM
#5923
and look for the lcd programmer then you will see where you can download it
10-29-2010 | 09:29 PM
#5924
Tech Addict
iTrader: (28)
Joined: May 2007
Posts: 708
From: Pullman, WA
Im running a 2.0 lpf in my 12th scale with a reciever pack. Is it true I have to keep the switch off on the esc? Im not getting any power when I do. Can I just run the ESC without the red wire to disable the bec or do I have to do something different? Thanks
10-29-2010 | 11:22 PM
#5925
i leave switch off and plug rec pack in rec and 1s in the esc