The APP for I-phone and Droid, displayed @ I-hobby Expo 2010, or others talking about, that can ADJUST the ESC setting...is for the 2011 version of the new Speed Passion line of ESC named REVENTON series.

We will have the APP release later this month called RC CAR A1 - an APP for general RC CAR setups, final drives and ESC setting storage software.

We do, however, have plan to make a adaptor that will work with the 2011 software about ESC adjustment via I-phone, Android, MS mobile that will work with the current series of SP ESC....but, that is not confirm yet.

Keep an eye on RED RC...we will have that announcment coming soon.

Silver Arronw II ESC burst is 380A. If you are using it for OFF ROAD...Silver Arrow II is the way to go.

thanks

Is the Reventon series a replacement for the GT2.0 Pro?

hey guys have a problem have cirtix stock spec speedo have plastic box to change settings with when i hook it up the values on the chart dont match the lcd values so i am lost on what settings i am changing

Not replacement (it will be SP decision)...Reventon is a new line of PRO series of ESC from Speed Passion.

I have both, and IMHO, the SA is a full on 1/8 scale speedo, and the R8 is a robust 1/10 that will run the bigger 550's

The big difference is size, while the R8 is not small, the SA is a full size speedo. IMHO, I would go with the SA. I have one in my Slash 4x4 and it is perfect.

Can some one point me to an on line source for a 21.5 club racing system?

I prefer ordering on line from a US source.

Thanks

This place has got them as of this morning http://www.harbor-hobby.net/.
Give Eric a call or email he will ship it out for you.

just posted a sp dyno programmer cheap on ebay if anybody wants it.

Edit

try and see nothing too bad to go wrong.

item #1 is the brake strength
item #2 is the drag brake
item #3 is 1 enable, 2 disable thermal protection.

hope that helps.

i took apart the 13.5t v3 for some cleaning and after putting back every part together the timing sensor moves left and right with slightly effort even after all the 3 screws are really tie.
any idea why?
thanx

Hey guys, I took a little time off cause of work, and now I find out my local club is
Now racin without boost.. So plaese don't fire too hard at me because I am sure
The question has been asked but I not find anywhere in my search a deffinet answer..
Looking for what non boost software to put in my LPF 2.0 running stock 17.5 V3 in a tc5
And LPF 2.0 runing a 13.5 in a WGT (assoc 10R5) not sure if they are both the same
Softwares or not..

Thanks again