Originally Posted by S.A.W (Post 7797606)

Ok thanks.

May I ask why you use 5.7 for 13.5 when all the files/documents are recommending around 6.25 - 7.00 ? please don't think I'm saying your setting is wrong but this is where I am getting confused with gearing it correctly and why I asked earlier if there was a suggested setting.

The manual with the motor recommends 4.8 -6.0 the SP Basic Supercharger setting PDF say's 6.25-7.0 and then the Word doc say's 6.5-7.0

I never know which to start with :lol: I presume you've tried loads of different fdr's ?

Thanks.

Originally Posted by shesha (Post 7798570)

Hey guys

Am checking my SP GT2.0 Carbon Edition on the USb interface software V1.33

Checkin the software version that is runnin on the ESC as it is now shows V1.10_090205_MOD did Speed passion a latest software I can upgrade to and if there is what are the benefits.

Thanks

Originally Posted by S.A.W (Post 7797606)

Ok thanks.

May I ask why you use 5.7 for 13.5 when all the files/documents are recommending around 6.25 - 7.00 ? please don't think I'm saying your setting is wrong but this is where I am getting confused with gearing it correctly and why I asked earlier if there was a suggested setting.

The manual with the motor recommends 4.8 -6.0 the SP Basic Supercharger setting PDF say's 6.25-7.0 and then the Word doc say's 6.5-7.0

I never know which to start with :lol: I presume you've tried loads of different fdr's ?

Thanks.

Originally Posted by S.A.W (Post 7799755)

Thanks very much Marcos.J and irgo :)

Marcos would you use the same speedo settings for indoors and just change the gearing ?

Simon.

Originally Posted by Marcos.J (Post 7800303)

yes pretty much

here are my settings for indoors with a 17.5

Originally Posted by steve eaves (Post 7800849)

Max everything cracker,gear it up until the motor wires unsolder then drop 1 tooth,what are you doing dude?Heading back anytime soon?

Originally Posted by defcone (Post 7798782)

If you're running mod and the track size is a medium-ish you won't notice much difference between 205 and the 528_MOD.

But if you're running a stock motor, 10.5t and higher you will notice a huge difference between 205_g and the stock softwares.

Originally Posted by Tha Skinny (Post 7800832)

I looking for settings for a 4wd off road. Running a kyosho zx-5 sp, and a ballistic 10.5 what's a steering point?

Originally Posted by BAM Motorsports (Post 7802939)

g'day just bought a new speedpassion gt v2.1 for my sc 10 it has a 13.5t xcelorin motor
just woundering what's a good starting point for the esc

i've been running the Speed Passion EXIGE Brushless ESC & Motor for the last 2.5 years in various offroad vehicles, but after a huge crash about 6 weeks ago esc and motor were both damaged beond repair

Originally Posted by g12314 (Post 7771931)

Attached is the .PDF of my BIG track settings.

PLEASE NOTE: I run the R1 Wurks dual motor fan, so please be careful with your gearing & ESC Settings. Run for a minute and check to make sure the temps are not getting too high.

Any questions, please post here or PM me. Here is a video of the track and some testing: http://www.youtube.com/watch?v=cX53c...eature=related

Jimmy