T.O.P. Racing "Photon" 1/10 EP Touring Car
#4787
#4788
Never mind could do with the spare parts for the sway bars.
#4789
Having real trouble finding replacement 10.5 ball cups. Can find the 14.5 and bigger but not the 10.5. Its the ones that go on the bottom of the shocks and on the sway bar adjuster. Anyone no if they are available as a pack or do you have to buy the complete sway bar kit.
#4790
Tech Adept
Hello
In the 3rd round of the Portuguese national championship
I ended up in fifth place in stock class.
I leave here my setup:
I used the Lipo chassi Moderate and rear medium wing.
In the 3rd round of the Portuguese national championship
I ended up in fifth place in stock class.
I leave here my setup:
I used the Lipo chassi Moderate and rear medium wing.
Last edited by pmc; 04-07-2014 at 03:13 PM.
#4792
#4795
Suspended
#4796
Tech Elite
iTrader: (5)
A lot of people seem to be very keen to get the new tiny gear diff, after building my first ball diff I also really want one, and I know of others who like me badly want to see what is inside the new one.
I wonder if TOP will release versions for other brands of car?, I know the spec R is kind of large in comparison.
My Photon is basically built now, just waiting for the bank balance to recover before buying the electrics (building new cars up is expensive), that and I have been waiting for the new Hobbywing Xtreme to come out, seems a shame to buy the old version when the new is due out any day now, also need to decide what brand motor to get...
I wonder if TOP will release versions for other brands of car?, I know the spec R is kind of large in comparison.
My Photon is basically built now, just waiting for the bank balance to recover before buying the electrics (building new cars up is expensive), that and I have been waiting for the new Hobbywing Xtreme to come out, seems a shame to buy the old version when the new is due out any day now, also need to decide what brand motor to get...
#4798
Tech Champion
iTrader: (3)
Join Date: Mar 2003
Location: Peoples Republic of Northern Virginia
Posts: 5,682
Trader Rating: 3 (100%+)
I picked up the new Sped-R gear diff ( X-ray T3 version) with the 38 tooth pulley. I need a 38 tooth pulley for the front spool, which one would be the choice? THX
BTW this will change the internal ratio from 2.0 to 1.9.....
BTW this will change the internal ratio from 2.0 to 1.9.....
Last edited by Nova F1 Racer; 07-06-2010 at 07:27 AM.
#4799
Lightweight Stock-Spec Gear Diff. for TOP Photon arrived !