T.O.P. Racing "Photon" 1/10 EP Touring Car
#8957
Tech Elite
iTrader: (5)
#8958
#8959
#8960
Need Help! A while ago I bought a Titanium spool from TR. I need to change the derlin out drives. I emailed TR they said they don't have them anymore. Does anyone know where I can get them I need 6. They are especially made so any other out drive won't fit. Thank you
#8961
hey guys, just a random question, i am missing my left rear wing
i will be replacing it with the carpet edition but that will just be a temp fix for now. Does anyone know where to source this from as our local Distributor doesn't seem to have it :-(
i will be replacing it with the carpet edition but that will just be a temp fix for now. Does anyone know where to source this from as our local Distributor doesn't seem to have it :-(
#8962
double post, my bad.
#8963
#8965
no worries, i was going to trim down the carpet one until i found the correct replacement, im particular like that haha, but on a better note, i live in australia, i found them on A-main last night. thanks guys.
#8966
Tech Rookie
Hi Guys , just a technical question ? If I may . I have just recently bought a 2nd hand Photon and have been trying to tighten the pulley belt . One of the top deck screws is stripped and I cant get the plate off . Is there any special method that you can suggest to get the culprit loose ?
#8967
Use a dremel to put a slot in the screw head then use a flat screwdriver to turn the screw out.
You don't need to loosen then top deck to adjust belt tension, is it one of the camber plate screws that you are talking about.
You don't need to loosen then top deck to adjust belt tension, is it one of the camber plate screws that you are talking about.
#8968
Tech Rookie
Thanks Skitee . Managed to lightly tap a torque Bit into the stripped screw and then unscrewed them . Man I am enjoying this car
#8970