HPI Cup Racer 1M
#1143
Tech Master
iTrader: (10)
Fed up with the ABC? I see Steve "O" has taken care of is driver with a brand spankin' new CR. Looks like the one from the 301 Challenge, LOL.
Kit, I believe Andy at one time posted on here that the Pro4 is a direct fit. Probably back a few pages. You could just pm him and ask, he'll tell you for sure.
Kit, I believe Andy at one time posted on here that the Pro4 is a direct fit. Probably back a few pages. You could just pm him and ask, he'll tell you for sure.
#1144
Tech Master
iTrader: (6)
Still have ABC, I will get it to work. I went back to Mimi Sunday messed with ABC car for a bit and found out the diff screws were broken both front and rear. Will mod the diff halves and gotta use the bigger screws.
#1146
Tech Addict
iTrader: (36)
diff
here's the diff that we are using in our car...it is so so smooth
Here are the part numbers for the Hot Bodies D4 WCE Diff
Currently there is not a complete set with a single part number
Also the diff below is made for the D4 WCE Offroad Race Buggy so a tad overkill for the Cup Racer. Although you will most likely never break a diff screw since it has the oversized diff screw and metal diff halves.
etc...
(working on more Cup Racer specific parts )
In the meantime for the ultimate super CR diff:
#61538 DIFFERENTIAL SCREW/HEAVY-DUTY NUT SET (2.6mm)
#61148 DIFF THRUST WASHER 2.8x5.8x1mm (2pcs)
#61149 DIFFERENTIAL THRUST BALL 1/16"
#B130 BALL BEARING 10x15x4mm (RUBBER SHIELD/2pcs)
#Z892 WASHER 10x12x0.2mm (10pcs)
#Z891 WASHER 10x12x0.1mm (COPPER/10pcs)
#61450 DIFFERENTIAL CUP JOINT SET
#A164 DIFFERENTIAL RING (13x19mm) (2 pcs)
#61433 BEVEL GEAR SET (39T/16T)
#A157 CARBIDE DIFFERENTIAL BALLS (3/32 ) 2.4mm (12 pcs)
#A165 SPRING 6x7x1.5mm (DIFFERENTIAL) BLACK (2 pcs)
Thanks,
AH
Currently there is not a complete set with a single part number
Also the diff below is made for the D4 WCE Offroad Race Buggy so a tad overkill for the Cup Racer. Although you will most likely never break a diff screw since it has the oversized diff screw and metal diff halves.
etc...
(working on more Cup Racer specific parts )
In the meantime for the ultimate super CR diff:
#61538 DIFFERENTIAL SCREW/HEAVY-DUTY NUT SET (2.6mm)
#61148 DIFF THRUST WASHER 2.8x5.8x1mm (2pcs)
#61149 DIFFERENTIAL THRUST BALL 1/16"
#B130 BALL BEARING 10x15x4mm (RUBBER SHIELD/2pcs)
#Z892 WASHER 10x12x0.2mm (10pcs)
#Z891 WASHER 10x12x0.1mm (COPPER/10pcs)
#61450 DIFFERENTIAL CUP JOINT SET
#A164 DIFFERENTIAL RING (13x19mm) (2 pcs)
#61433 BEVEL GEAR SET (39T/16T)
#A157 CARBIDE DIFFERENTIAL BALLS (3/32 ) 2.4mm (12 pcs)
#A165 SPRING 6x7x1.5mm (DIFFERENTIAL) BLACK (2 pcs)
Thanks,
AH
#1148
#1155