HPI Cup Racer 1M
#3017
Tech Apprentice
iTrader: (3)
It doesn't appear that there are very many people still interested in the Cup Racer. So far I have heard from maybe three others interested in the machined metal front input drive cup for a total of (4). I can wait to place an order as I'm far from starting the building of my kit. If anyone else knows of someone that is interested in one of these drive cups can still PM me.
#3018
Tech Master
iTrader: (8)
I was able to fix my front input cup with the suggestion I received here. I drilled three small holes in the end with a finger drill and CA'd pieces of a body clip in place of the plastic pins. It holds really well and looks like it will last a while. It wasn't that hard to do if you have the right tools.
While I had the front apart I swapped over to the stand up shock setup. It almost felt like building the kit again.
While I had the front apart I swapped over to the stand up shock setup. It almost felt like building the kit again.
#3019
Anyone interested in selling their cup racer, let me know. Looking to pick up a few. Pm me.
#3020
Tech Master
iTrader: (2)
It doesn't appear that there are very many people still interested in the Cup Racer. So far I have heard from maybe three others interested in the machined metal front input drive cup for a total of (4). I can wait to place an order as I'm far from starting the building of my kit. If anyone else knows of someone that is interested in one of these drive cups can still PM me.
sold it to a buddy, who eventually bailed on in too.
now we both run abc genetics.
the cup racer had alot of potential, but shoddy materials held it back IMO.
#3021
Tech Master
iTrader: (8)
It's really a trick bit of kit, but I agree there are a few places that can be improved. Maybe HPI will re-release it with some updates. I also think they needed several more body options to really get the interest going. There are so many short wheelbase cars out there that they could use. They have the license for the Ford Focus. That would be an awesome M chassis body.
#3022
I love my Cup Racer! It's the only car I own that has stayed intact and runable for 3 years now. After I machined a carbon fiber hinge pin mount I have not had an issue with anything. Also try using the rear shock tower in front for the standup shock position. It seems a bit more stable in the turns. FYI I am running against mostly M chassis cars so to be more fair I run rear wheel drive only with the gear diff and a 21.5. Its quick and handles great! Just stumbled on this thread so thought I would put in my .02.
Vaughn
Vaughn
#3023
Tech Master
iTrader: (2)
I love my Cup Racer! It's the only car I own that has stayed intact and runable for 3 years now. After I machined a carbon fiber hinge pin mount I have not had an issue with anything. Also try using the rear shock tower in front for the standup shock position. It seems a bit more stable in the turns. FYI I am running against mostly M chassis cars so to be more fair I run rear wheel drive only with the gear diff and a 21.5. Its quick and handles great! Just stumbled on this thread so thought I would put in my .02.
Vaughn
Vaughn
the cupracer can take out the traxxas rally cars though.
#3024
I hope they do release an updated version of this chassie!
Love the Cup Racer and have two at the moment.
My first M-chassie was the HPI RS4 mini then i have had the Genetic and one Active hobby A210ss.
I just use my cars for drifting so have note broken anything on my Cup!
Love the Cup Racer and have two at the moment.
My first M-chassie was the HPI RS4 mini then i have had the Genetic and one Active hobby A210ss.
I just use my cars for drifting so have note broken anything on my Cup!
#3025
hi all glad the drive cup fix worked for you. as for abc's and others i race with them two and we in the cup racer dominate the track all 3 of us to the 8 to 10
other cars you tune your c.r. right it flies. some of the other guys after driveing
mine are looking to get one. two each his own.
other cars you tune your c.r. right it flies. some of the other guys after driveing
mine are looking to get one. two each his own.
#3026
Tech Regular
iTrader: (7)
I have to concur with Rob.
Cup racer is one of my favorites.
I finally had the time to convert to the exotek chassis and aluminum shocks that I purchased a year ago.
Also have a 1/10 touring interior from Tamiya that I plan on painting and another Porsche body that will be painted to match a Vaillant-Kremer livery
Pics to follow....
Cup racer is one of my favorites.
I finally had the time to convert to the exotek chassis and aluminum shocks that I purchased a year ago.
Also have a 1/10 touring interior from Tamiya that I plan on painting and another Porsche body that will be painted to match a Vaillant-Kremer livery
Pics to follow....
#3027
Hi. Cool cant wait to see the pic's when you get done with it. I love to see
other people's work.
other people's work.
#3028
#3029