HPI Cup Racer 1M
#2551
Tech Champion
iTrader: (15)
A few examples;
http://www3.towerhobbies.com/cgi-bin...?&I=LXBAKN&P=7
http://www3.towerhobbies.com/cgi-bin...?&I=LXYKT2&P=7
Is there a local hobby shop near by? Battery packs are like shoes. You should try them on before buying
Pinion depends on size of spur, type of motor and esc!
http://www3.towerhobbies.com/cgi-bin...?&I=LXBAKN&P=7
http://www3.towerhobbies.com/cgi-bin...?&I=LXYKT2&P=7
Is there a local hobby shop near by? Battery packs are like shoes. You should try them on before buying
Pinion depends on size of spur, type of motor and esc!
#2552
O-rings?
Does anybody know what standard size do the O-rings conform to?
I was thinking about AS568A-103 but I'm not sure about that.
I was thinking about AS568A-103 but I'm not sure about that.
Last edited by aSab; 07-24-2011 at 09:11 AM.
#2553
Had a CR and decided to sell it.. now i bought another one and ordered the exotek stuff after driving it with some minis tonight.. its gonna be a fun class to run with a silver cans
#2554
Anyone have any experience with the fmj shocks from bizarre off eBay?
#2555
Does anyone post I this thread anymore?
#2556
Sometimes. It gets slow at times.
#2559
Sneak Peek
Here's a project I've been working on in my spare time. The 3d model is done. Just need to sneak the wooden buck onto my friends CNC mill when he's not looking. He also has a Vacuum forming machine so I do have all the tools to get this project done.
Any guesses? It's custom made for the Cup Racer but it's been made before for pan cars.
Any guesses? It's custom made for the Cup Racer but it's been made before for pan cars.
Last edited by Manny; 08-11-2011 at 06:05 PM. Reason: syntax.....
#2560
An Seven?
#2561
looks like a seven to me as well
#2562
If you have a cup racer and you are around these states NY, NJ, PA, VA, NC this is the race for you.
#2563
#2564
Tech Elite
iTrader: (3)
Hello, Mini racers.
New Mini bodies are arrived from ABC HOBBY.
Click Here to see the new Mini bodies
FYI, Thanks.
New Mini bodies are arrived from ABC HOBBY.
Click Here to see the new Mini bodies
FYI, Thanks.
#2565
Tech Rookie
Does any have this problem?
I have a cup racer with the hpi aluminum front and rear hub carriers with hot racing axle cups and when I put the 0mm offset plastic hubs on all four wheels the two wheels(front/rear) on the right side of the car sit further in than those on the opposite side. I have to put a 2mm spacer on the front right wheel to match the front left wheel with a 0mm offset spacer. And a 1mm spacer on the rear right wheel to match the rear left wheel with a 0mm offset spacer. The rims all have a 0mm offset.
Anyone know the reason/cause of this?
Anyone know the reason/cause of this?