Titan Racing

Does anyone know the part number and an online parts store that I can buy a replacement manual? Or does some one have a pdf? Trying to figure out the shocks and how they mount.
Thanks

TryHard

iTrader: (4)

ahh, Rcspeedo baet me too it, and actually that makes more sense (i guess i was thinking on power, as racing stock I rarely come fully off it.. )

rcspeedo

Tryhard: You are still correct on that since you don't have to toe out to get the steering entering the corner, w/c can provide better steering on power.

Stew : I forgot to mention that this will narrow your front-end so you would need to adjust the rear accordingly.

s2

thanks fot the help guys, i might try it out this weekend if ive got time and the car is running well, didnt have such good luck last time i visited the track im racing at

tryhard; i also have that disease

on another note i heard RainbowTen have run out of the tamiya subarus, because the entire production run has been sold
will they have another production run or are thease another limited run product?

s2

to be the same as the narrowed front, yes?

trf racer

try hard were u at the thursday night club in chattham last thursday?

TryHard

iTrader: (4)

Not sure about where to get a manual from, have you tried contacting your distributor? might be able to point you int he right direction for one.

If you want, I can scan in the pages for the shock mounts. Off the top of my head, I think the std mounts are for one hole in on the top at the front, and fully out at the top on the rear.

HiH
Ed

Obsidian

iTrader: (10)

Hello Titan Racing,

YGPM

TryHard

iTrader: (4)

Yup I was there, Didn't have much luck though. I had the white tamiya subaru on a 415.... oh and I won the D-final... (don't ask, had bad luck in Q, my finals time would have been good enough to bump me up to the top end of the B )

rcspeedo

Yes. Use A for the rear-front and adjust the rear toe by changing the blocks of the rear-rear.

Obsidian

iTrader: (10)

Hello everyone,

RCspeedo: what is W/C?

TryHard

iTrader: (4)

Hmm, I've been running with C/A on the front, but with B/D on the rear (LWT arms, so1 deg hubs, making 2 deg rear toe total)
I don't think you need to narrow the rear down, it's doesn't seem to cause a problem for me. Maybe it's something to try though.
I would hazard a guess though that a narrower car would seem very darty, and a bit unstable, just because the overall track is reduced. Not sure though, as I have never tried it.

trf racer

you had da 415 with lw suspension and low friction belts?
i had da evo3 with red shell and peak t-shirt on.i was sitting behind u.remember

TryHard

iTrader: (4)

which can, is my guess

(boy were all active in here tonight )

rcspeedo

w/c = which