Awesomatix EP Touring Car (A700 Shaft Drive)
#4996
Torque steer
I think 90% of the time racers confuse torque steer with tweak or in equal settings. Tweak can cause a car to pull to one side as can unequal droop settings. You can tweak a car and it will show flat on a balance beam but if up travel is different the car transfers weight unequal to the rear and can cause it to pull also.
#4997
#4998
Registered User
Neat.
#4999
I've just published an article looking at the A700L and comparing it to a conventional belt driven car such as the TRF417 or Xray T4. It points out the differences and I go through how to change the settings compared to a conventional TC.
I hope this article will help smooth the transition when moving to an Awesomatix chassis.
Please check it out and I hope you like it =] http://www.thercracer.com/2013/12/ge...tix-a700l.html
I hope this article will help smooth the transition when moving to an Awesomatix chassis.
Please check it out and I hope you like it =] http://www.thercracer.com/2013/12/ge...tix-a700l.html
#5000
I've just published an article looking at the A700L and comparing it to a conventional belt driven car such as the TRF417 or Xray T4. It points out the differences and I go through how to change the settings compared to a conventional TC.
I hope this article will help smooth the transition when moving to an Awesomatix chassis.
Please check it out and I hope you like it =] http://www.thercracer.com/2013/12/ge...tix-a700l.html
I hope this article will help smooth the transition when moving to an Awesomatix chassis.
Please check it out and I hope you like it =] http://www.thercracer.com/2013/12/ge...tix-a700l.html
#5001
Tech Champion
iTrader: (31)
Just wanted to post that my 'ole skool' A700 was phenomenal this weekend @ our 2nd Annual Can-Am Challenge. It was faster and a ton better than the 2nd place finish @ our 2013 TZGP about a month ago.
I wanted to try something different and run the HPI 'D' compound SLICKS. Kinda frowned upon up here cause they seem to be only a asphalt tyre (they do seem harder for some reason but I wanted to prove critics wrong). I felt they worked fairly well and qualified 4th with them amongst some of our most talented drivers. For the Main though something told me to go back to the VTA treads and I'm glad I did. With a slight change in gearing and in the front suspension, the car felt the best it has all season. Enjoy...
http://youtu.be/Nl7qbZ_Be7c
I wanted to try something different and run the HPI 'D' compound SLICKS. Kinda frowned upon up here cause they seem to be only a asphalt tyre (they do seem harder for some reason but I wanted to prove critics wrong). I felt they worked fairly well and qualified 4th with them amongst some of our most talented drivers. For the Main though something told me to go back to the VTA treads and I'm glad I did. With a slight change in gearing and in the front suspension, the car felt the best it has all season. Enjoy...
http://youtu.be/Nl7qbZ_Be7c
#5002
Tech Fanatic
Just wanted to post that my 'ole skool' A700 was phenomenal this weekend @ our 2nd Annual Can-Am Challenge. It was faster and a ton better than the 2nd place finish @ our 2013 TZGP about a month ago.
I wanted to try something different and run the HPI 'D' compound SLICKS. Kinda frowned upon up here cause they seem to be only a asphalt tyre (they do seem harder for some reason but I wanted to prove critics wrong). I felt they worked fairly well and qualified 4th with them amongst some of our most talented drivers. For the Main though something told me to go back to the VTA treads and I'm glad I did. With a slight change in gearing and in the front suspension, the car felt the best it has all season. Enjoy...
http://youtu.be/Nl7qbZ_Be7c
I wanted to try something different and run the HPI 'D' compound SLICKS. Kinda frowned upon up here cause they seem to be only a asphalt tyre (they do seem harder for some reason but I wanted to prove critics wrong). I felt they worked fairly well and qualified 4th with them amongst some of our most talented drivers. For the Main though something told me to go back to the VTA treads and I'm glad I did. With a slight change in gearing and in the front suspension, the car felt the best it has all season. Enjoy...
http://youtu.be/Nl7qbZ_Be7c
#5003
I've just published an article looking at the A700L and comparing it to a conventional belt driven car such as the TRF417 or Xray T4. It points out the differences and I go through how to change the settings compared to a conventional TC.
I hope this article will help smooth the transition when moving to an Awesomatix chassis.
Please check it out and I hope you like it =] http://www.thercracer.com/2013/12/ge...tix-a700l.html
I hope this article will help smooth the transition when moving to an Awesomatix chassis.
Please check it out and I hope you like it =] http://www.thercracer.com/2013/12/ge...tix-a700l.html
#5005
This is true - I learned quite a bit in just one evening of testing @ Horsham. I definitely look forward to the next opportunity I get to work with the car. Thanks to the Awesomatix drivers @ Horsham for all of their setup advice, and to Mike Hanulec for the parts support.
#5006
#5007
I'm glad the article is of use, there definitely is a learning curve when moving to Awesomatix but it's fun and very rewarding.
Congratulations to the winners from this weekend =]
Congratulations to the winners from this weekend =]
#5008
Tech Fanatic
"Awesomatix took the Mod TQ & Win, Scale Spec Win, Stock TC TQ and 2nd , 3rd, and 4th places at the 2nd Annual "CAN AM Challenge Race " pulling in a devoted group of racers from Canada and the greater Northwest , and hosted by Seattle RC Racers / Hangar 30.
120 + entries in a one day event."
Congratulations for our drivers!
Full report, video, results are here: https://www.facebook.com/awesomatixRC
120 + entries in a one day event."
Congratulations for our drivers!
Full report, video, results are here: https://www.facebook.com/awesomatixRC
#5009
This is true - I learned quite a bit in just one evening of testing @ Horsham. I definitely look forward to the next opportunity I get to work with the car. Thanks to the Awesomatix drivers @ Horsham for all of their setup advice, and to Mike Hanulec for the parts support.
In all honesty, I drove Bea's car after he was given a few tips from the Horsham crew and I was .3sec faster with the Awesomatix than I was with my car. And, Awesomatix USA is only 10min from your house...lol (no house calls tho)
Wish I had the loot in my "luxury/hobby fund", I would've picked one up for Christmas.
#5010
Dude stop trolling me, I told you I don't do the bro-mance thing.
Buy Bert's he don't use it or do he really have one?
Buy Bert's he don't use it or do he really have one?