Tamiya TB-02
08-02-2005, 05:27 AM
#1426
Originally Posted by Phenochilus
Tobee craft as in http://www3.kcn.ne.jp/~tobee/English.htm
Tamiya don't make them at that size. Smallest for the tb-02 is the f1 high speed gear set which has the 52t spur.
The 49t spur is a must have if you're racing 540 silver can motors and a high speed track.
You might want to check legalities if you race in TCS though.
Tamiya don't make them at that size. Smallest for the tb-02 is the f1 high speed gear set which has the 52t spur.
The 49t spur is a must have if you're racing 540 silver can motors and a high speed track.
You might want to check legalities if you race in TCS though.
08-02-2005, 11:30 PM
#1427
Originally Posted by zax
WHERE TO FIND AND WHICH BRAND IS THE 49T SPUR GEAR?
Tobee Craft make it, I think Kawada also makes it, I know they make the pinions
www.kawadamodel.co.jp
08-03-2005, 01:58 AM
#1428
Originally Posted by ford_racing
Tobee Craft make it, I think Kawada also makes it, I know they make the pinions
www.kawadamodel.co.jp
www.kawadamodel.co.jp
08-03-2005, 02:29 AM
#1430
Originally Posted by ford_racing
no, Tamiya doesn't make pinions big enough to work with the 49tooth spur.
Tamiya stops at a 25 tooth pinion, you can use the kawada pinions though
Tamiya stops at a 25 tooth pinion, you can use the kawada pinions though
08-03-2005, 03:27 AM
#1432
Originally Posted by ford_racing
I believe thats all you need, the TB02R is a great car, I just wish I got that instead of my TB02
08-03-2005, 05:18 PM
#1433
Tech Rookie
I use the Tobee craft 49t spur. Kawada only makes the pinions up to 28 tooth I think.
So you can use the Kawada 28 tooth pinion with the Tobee craft 49 tooth spur gear which gives you a 4.53 gear ratio.
If you want to run 4.13 gear ratio you need to buy a Tobee craft 31 tooth pinion.
So you can use the Kawada 28 tooth pinion with the Tobee craft 49 tooth spur gear which gives you a 4.53 gear ratio.
If you want to run 4.13 gear ratio you need to buy a Tobee craft 31 tooth pinion.
08-04-2005, 01:45 AM
#1435
Originally Posted by Datum
I use the Tobee craft 49t spur. Kawada only makes the pinions up to 28 tooth I think.
So you can use the Kawada 28 tooth pinion with the Tobee craft 49 tooth spur gear which gives you a 4.53 gear ratio.
If you want to run 4.13 gear ratio you need to buy a Tobee craft 31 tooth pinion.
So you can use the Kawada 28 tooth pinion with the Tobee craft 49 tooth spur gear which gives you a 4.53 gear ratio.
If you want to run 4.13 gear ratio you need to buy a Tobee craft 31 tooth pinion.
08-04-2005, 03:01 AM
#1437
THANK YOU..
NOW I KNOW ALREADY..THANK YOU EVERYBODY THAT TELLING ME SO MUCH...THANKS.. 
08-05-2005, 10:04 PM
#1438
PIC
HII EVERYBODY..CAN U ALL POSE YOUR TBO2 PIC THERE..THANKS.
08-11-2005, 02:28 PM
#1439
Tech Apprentice
Does tamiya make a CF top deck to go on the TB02?
