Hey Yohan , i got the E4 working really good!!! you need to pick one up again!

The version I need will have to have aluminum brace up front for the camber links, and rear aluminum hubs, because the stock plastic ones had a lot of play on them after a couple runs.

I'll check with Wolf and see if I can get a C1 with rear aluminum hubs, and that front camber link aluminum brace.:nod:

Dash 4 the cash with the TM E4?

Florida State Series?

Very tempting...just gotta move some cars:eek::nod:

mine has almost no play at all :)

I made a typo on the set up that I posted , on the Bladder note i put "none" but i meant no o-ring under the bladder.

Anthony I answered your email:)

way to cost someone a TQ spot with that bogus info.....:ha::ha::ha: How's the scene out your way bro? Touring car is drying up a little out here. I will be going to off road for the winter months. We still have the KO race and the regionals to come out this way but after that my sedan will be packed away.

TM shock set?
 

I have the TM shock set 502143,

I need to know the different lbs for each spring, Can anyone help please.

Thanks Anthony

TM Springs:

1.2mm= 10lbs
1.3mm= 13lbs
1.4mm= 17lbs
1.5mm= 20lbs
1.6mm= 26lbs
1.7mm= 31lbs
1.8mm= 41lbs
1.9mm= 51lbs

Actually the mod class has been picking up alot!

I dont know if any of you had problems with the rear belt in mod but i had 2 that stripped , I found a stronger belt its a little wider. I wqill be testing it out tomorow with some mod motors. As you can see in the following pictures the difference between the stock belts and the new belt that i got. I had them made for me and I had to order a few to meet the minimum order so I have a few extras if anyone needs them.

http://www.deadzoom.com/member/terri...naugust046.jpg

http://www.deadzoom.com/member/terri...naugust047.jpg

http://www.deadzoom.com/member/terri...naugust048.jpg

http://www.deadzoom.com/member/terri...naugust049.jpg

I'm sure Wolf would like all future pics to have the rear shocks attached :nod::nod::nod::nod:

Where did you custom order the belts from? I was thinking about doing the same for my XX-4.

:sneaky:

Rear Belts?
 

I would be interested in some of those I run mod and my rear belts keep stretching. Please Pm me details.

Also What shocks are you running, as they dont look anything like the ones on my E4?

Thanks Anthony.

ygpm for belt info

The shocks are from TM they are the newer ones , also Im running the bottom shock spring collar from the TC5 to be able to use the AE springs.

Marcos, I would be interested in one belt to keep as my spare. ;)

But do you think I will have much of a problem considering I probably won't run anything faster than 13.5BL? :)