|
Originally Posted by slakr
(Post 4760218)
Marcos, I would be interested in one belt to keep as my spare. ;)
But do you think I will have much of a problem considering I probably won't run anything faster than 13.5BL? :) |
Originally Posted by Marcos.J
(Post 4759413)
:sneaky:
|
Originally Posted by kufman
(Post 4760638)
does that mean it is a secret? :(
|
Marcos,
Have you tried the K-Factory belt(k2116)? |
Originally Posted by Barry Baker
(Post 4761231)
Marcos,
Have you tried the K-Factory belt(k2116)? If you want to try one let me know. Good luck in Vegas! |
Well I tested the new rear belt tonight with the 3.5 SP motor and it was great! I think I have my belt skipping issues solved!!
|
Marcos
I run your latest setup with one minor change I ran a a front diff. Find this easier to drive on a tight indoor carpet track. I like the setup only problem I found was I am generating a lot of grip and steering now, to much infact to the point that the car was grip rolling on some of the faster corners. I turned down the steering travel, this helped in the fast following corners, but the car then doesnt have enough lock to get me round the slower corners and it wont change direction. So I am basically back to where I was with my original setup. Any ideas on how to remove the grip roll but keep everything else. Thanks Anthony. |
Originally Posted by A Coldman
(Post 4762731)
Marcos
I run your latest setup with one minor change I ran a a front diff. Find this easier to drive on a tight indoor carpet track. I like the setup only problem I found was I am generating a lot of grip and steering now, to much infact to the point that the car was grip rolling on some of the faster corners. I turned down the steering travel, this helped in the fast following corners, but the car then doesnt have enough lock to get me round the slower corners and it wont change direction. So I am basically back to where I was with my original setup. Any ideas on how to remove the grip roll but keep everything else. Thanks Anthony. |
Originally Posted by Marcos.J
(Post 4762834)
you got me there I dont race carpet much, but I would start by running stiffer springs in the front or maybe 6 degree caster blocks, Im going to be racing carpet next weekend I will start with that set up and see what happens. Like I said I dont race alot of carpet so Im not sure.
|
:nod:clint do you have yours together so you and your teamate can bond?:nod:
|
Originally Posted by AARON YOUNG
(Post 4762960)
:nod:clint do you have yours together so you and your teamate can bond?:nod:
|
maybe wolf will sponsor you so you and barry can work together.
|
Originally Posted by AARON YOUNG
(Post 4762968)
maybe wolf will sponsor you so you and barry can work together.
|
Originally Posted by STLNLST
(Post 4762884)
Randy Caster would have had an answer......:blush::blush::blush:
|
Well I installed a few K-Factory goodies and Im going to test tomorow at our local club race. Made minor changes to the set up that I posted before and if the changes are positive I will post the new set up sheet tomorow night.
|
| All times are GMT -7. It is currently 09:59 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.