Originally Posted by Marcos.J (Post 4807743)

This is my last weekend of running 13.5 , from now on is Mod only :)

Originally Posted by STLNLST (Post 4808124)

So I send you mods and you send me 13.5's...:lol::lol::lol:

Originally Posted by Marcos.J (Post 4808316)

deal:)

Originally Posted by STLNLST (Post 4808321)

They gotta be Novak though:sneaky:

Originally Posted by Tomradio (Post 4802070)

Marcos...Thanks for your updated setup.

Barry... Your setups from Vegas would be much appreciated. Thanks

Originally Posted by Marcos.J (Post 4814426)

The set up that I posted above worked very well, I was able to hit the fastest laps in the 13.5 class today, the car carried alot of corner speed. finished 2nd in the a main (due to lap traffic:eek:)but finished 1st for the points series;)

Originally Posted by Marcos.J (Post 4814426)

The set up that I posted above worked very well, I was able to hit the fastest laps in the 13.5 class today, the car carried alot of corner speed. finished 2nd in the a main (due to lap traffic:eek:)but finished 1st for the points series;)

Originally Posted by PW (Post 4814494)

Sandbagger:lol:

j/k...your car looked good:nod:

Originally Posted by yyhayyim (Post 4814432)

Super:nod:

I think the E4 will do good things in this year's Florida State Series Season:)

Sorry I missed the call...I was unloading all my crap out of car and then went out to diner:sweat: Call u tomorrow:cool:

Originally Posted by Marcos.J (Post 4814506)

Thanks Paul!!(I had a little help from Sherwin) but from now on its mod or nothing:)

Originally Posted by STLNLST (Post 4815585)

I guess I gotta move to Florida to get a piece huh:sneaky:

Originally Posted by doriftu (Post 4815648)

hi, a lot of info from this thread... am only at pg28.

can hacker BL motor fit into the E4 without mod?

anyone tried to custom order the E4 RS with a one-way instead of spool? i know Wolf hobbies is able to customize E4 orders in the US but I am ordering outside of US. And nope, ordering from US is wayyy too expensive in terms of shipping.

perhaps TM can include the 'multi-diff' in the E4RS just like what they have in the original E4...

Originally Posted by Marcos.J (Post 4814506)

Thanks Paul!!(I had a little help from Sherwin) but from now on its mod or nothing:)

Originally Posted by islander360 (Post 4816339)

I think I helped too much. :lol: Nice run.

Originally Posted by slakr (Post 4816905)

Hey... does the Wolf Hobbies Team Magic 1/10 E4FS/CS Rubber Tire Spec Electric Touring Car come pretty well assembled (like my E4JS did) or is it a kit requiring complete assembly? Thanks.

Originally Posted by slakr (Post 4816905)

Hey... does the Wolf Hobbies Team Magic 1/10 E4FS/CS Rubber Tire Spec Electric Touring Car come pretty well assembled (like my E4JS did) or is it a kit requiring complete assembly? Thanks.

Originally Posted by slakr (Post 4817039)

Thank you both for the quick response.

I really like my TM E4JS that I am running in 17.5 on Asphalt right now. :nod:

I also run a T2R in VTA. Shortly we will be moving indoors for 17.5 Rubber Tire Carpet and a VTA class as well. :tire:

I am just trying to decide to either pick up another E4JS for VTA, or pick up the E4FS/CS to use in 17.5 and change over my current E4JS for VTA. Either way the trusty old T2R gets retired... just trying to simplify stocking spare parts. :sneaky:

Originally Posted by doriftu (Post 4820438)

pls correct me if im wrong, the E4 RS mounts the servo using double sided tape?? :confused: thats my understanding based on the exploded diagram. Is the alu servo mount necessary then?

There is no servo saver included in the E4 RS also right?

Seems like E4 has all the goodies vs the RS. Any other parts that the ori E4 has over the RS that was not mentioned explicitly?

Thanks.

Originally Posted by Barry Baker (Post 4792877)

Actually there were only 2 mains....

I was on an Amain run the last run when I got caught up in a mistake by someone else that cost me 5 seconds....But I am very pleased with the Cars I ran...From the first run to the mains the cars were very responsive to all the changes I made during the week...anyone there can tell you that my cars were very competitive...Paulie was a step ahead of everyone(in Foam) but I feel I could run with anyone else at times...And this was only the first time at the track with the cars....

We will see who is laughing at the next few races!!!!!!!!!!!

Barry

Originally Posted by Barry Baker (Post 4822764)

..the last one I picked a fight with kicked my butt!!!!!....LOL

Barry

Originally Posted by doriftu (Post 4823416)

what is a good combo for pinion and spur for the E4RS due to the space constraint? can it fit a 83/32?

I am running a 11.5 with FDR ~5.3-5.5.

Marcos J, thanks for answering my questions so far :nod:

Originally Posted by Marcos.J (Post 4823585)

I m guessing you are using 48 pitch try a 75/29 for a 5.3fdr and 75/29 for s 5.5 fdr, you should have plenty of space with that spur. the 83 and 85 i use in mod.

Originally Posted by doriftu (Post 4823635)

yup, im using 48p.

thanks a lot Marcos.

TM or Wolf Hobbies should hire you and pay you bonus for 'working' until so late... :lol::lol:

Originally Posted by doriftu (Post 4840147)

The E4 RS has
-lightweight front and rear bulkhead upper mount (P/N: 503196 & 503224)
-lightweight Rear Front Hinge Pin Mount (503218).
What are these made off? ABS?

Will these 'lightweight' parts affect the RS performance since they look important parts?

Thanks in advance

Originally Posted by slakr (Post 4840964)

My TM E4JS at Rosewood track at Glenn's Hobby Corner in Goldsboro NC down the back straight
http://i222.photobucket.com/albums/d...09-13-2008.jpg

Inside line pass
http://i222.photobucket.com/albums/d...09-13-2008.jpg

The Rosewood track at Glenn's Hobby Corner in Goldsboro NC
http://i222.photobucket.com/albums/d...0track0013.jpg

Originally Posted by Marcos.J (Post 4842158)

Ready for the Florida State Series starting this weekend!!:D

http://www.deadzoom.com/member/terri...naugust071.jpg

http://www.deadzoom.com/member/terri...naugust072.jpg

Thanks Wolf for your support:nod:

Originally Posted by Solara (Post 4842731)

I didn't hear you thanking me.....:lol:

Anyhow, car looks good....I just need to finish the last NITRO racing then I "HOPE" I can get back to EP racing....