Xray T2'008
#1276
Xray RC club
i love T2'008
#1278
They should be titanium
#1279
Tech Master
iTrader: (1)
I'm using that setup on my 008US on rubber carpet, low-med traction. It's pretty dialed.
#1280
thanx dude
+.75 roll centre is that takes off some front grip?
+.75 roll centre is that takes off some front grip?
#1281
Tech Master
iTrader: (1)
We can't single out a single setting and give it credit for a general consequence. In theory it takes away a little initial turn in compared to a lower front RC and softer front springs or bar that would yield the same mid-corner steering. In general, all I'll say is that the 008 has a TON of steering, and all setups take many steps to make the steering strong but stable.
One very interesting thing about the Teemu setup I use is the rear suspension stiffness. With essentially white springs in the back PLUS a swaybar, it runs a stiffer rear suspension than my foam car. Or maybe equally stiff, as the foam setup runs more spacers on the rear outer upper camber link.
I use the most equivalent standard Xray springs b/c I don't want to buy more springs. In the rear it is white, in the front it is one of the dark blue-like springs (Xray made a serious mistake by making four springs almost the same color in consecutive stiffnesses). There's a graphic Xray made showing how the old and new springs match up. Looking at them now, I'm not even sure which ones I'm using.
The other issue to mention is that I have a little trouble getting the ride height down. The standard springs and last year's RP30s put my min ride height at 5.5-6mm.
-Adam
One very interesting thing about the Teemu setup I use is the rear suspension stiffness. With essentially white springs in the back PLUS a swaybar, it runs a stiffer rear suspension than my foam car. Or maybe equally stiff, as the foam setup runs more spacers on the rear outer upper camber link.
I use the most equivalent standard Xray springs b/c I don't want to buy more springs. In the rear it is white, in the front it is one of the dark blue-like springs (Xray made a serious mistake by making four springs almost the same color in consecutive stiffnesses). There's a graphic Xray made showing how the old and new springs match up. Looking at them now, I'm not even sure which ones I'm using.
The other issue to mention is that I have a little trouble getting the ride height down. The standard springs and last year's RP30s put my min ride height at 5.5-6mm.
-Adam
#1282
hey guys does anyone have a good base setup for low to medium traction foam carpet setup for the '008.
Appreciate the help!
Appreciate the help!
#1283
Tech Master
iTrader: (1)
#1284
#1285
sorex 24R tires
Also I've received all my orders from RCMARKET
Many Thanx for Great Service
Also I've received all my orders from RCMARKET
Many Thanx for Great Service
#1286
Do you guys Use Spacer on Multidiff Halves on EU car?
I've put some plastic 3.5mm blades on 52.5mm CVDs by this way wishbones can't move free !
Should I Move that diff halve spacers?
Cheers
I've put some plastic 3.5mm blades on 52.5mm CVDs by this way wishbones can't move free !
Should I Move that diff halve spacers?
Cheers
#1287
#1290
Tech Elite
iTrader: (51)
Join Date: Feb 2002
Location: Comin at ya from a distant galaxy
Posts: 2,930
Trader Rating: 51 (100%+)
Anyone have a Setup for the Xray t2 008 using jaco prism rubbers on asphalt the can pm me?