sands

http://cgi.ebay.com/ws/eBayISAPI.dll...tem=5900569949

I listed this a month or so ago here. No takers so it's off to the public!

Thanks

wyd

iTrader: (51)

He has only ran it once but did very weel. He had zero practice and finished 2nd in 19 turn at our local track. Has not ran it since but he should be running with me very soon. Great car!!!!!!

JusBox

iTrader: (1)

He has some pics in the for sale forum.

http://www.rctech.net/forum/attachme...&postid=889668

Herminator

I often notice the same thing, an easy answer from someone would be nice, but so far all I've heard seems to be the mid span suspension arms. I'm not sure if thats the route I'd like to go because the cars usualy very good around the rest of a track and only suffers in one or two of the tightest sections. I guess it's how much of the stability are you willing to sacrifice.

wyd

iTrader: (51)

I would think you could try just a tad less rear toe in or raise the rear roll center some. If you are working with the front for more steering you could try lower the front camber link a little (especially if it is a top mounted setup, don't have mine yet to know 100%) or you could also lower the front roll center on the arms by lower ball studs or smaller spacers. I will know more once I get my car and actually get to see how everything is setup. You could also use small 1mm washer behind your tires like the HPI Pro4 does to widen the rear by a mm on each side to loosen the car just a tad to make it faster thru the sweepers.

I know for me I will be using the mid span arms to start with and work from their but that is just me.

I don't know Herminator how much of this you tried but just some things I thought of. Maybe one will help you out.

Merciless

You could try placing some small spacers under the rear wishbones mounting balls.This will alter the roll center the loosen the rear alittle .

stjerno

I haven't tried to raise the roll center in the rear but I'm running with 0.8mm spacers in the front of the rear arms to add antidive.. and it gave me just the needed extra steering for our track. www.brc-racing.dk

I'm also running the 1 deg rear hubs and can only recomend them for everyone.. haven't tried the mid span arms since our track is fairly large (its just about a perfect 1:10 track)

You might also try to move the front dampers in a hole or 2 in the top.
Other surgestion would be to put a 1.4/5.75 spring in the rear.
Raise the rear 1-2 mm more than the front.

And don't do it all at once

Happy racing

JDM_DOHC_SiR

iTrader: (31)

Back up to the front page

stjerno

OVA

iTrader: (86)

JDM YGPM

lowbugit

Guys I am fullfilling a request for a fellow Alex Racing driver who can not seem to get an account on RC tech for some reason. He asked if I would ask a few of you guys if you would take a look at the Misc. vehicle thread on the RC Zone for a question until he can get an account on here. Thanks. There ya go Chance.

Herminator

can you post a direct link please

ECHOLogic

I noticed a price drop on the R3.... is there a new kit coming soon?

NismoSkyline17

Nope. Steve is selling them as a Reedy Race special. They are coming out with a regular carbon fiber chassis R3. No more sparkles.

JDM_DOHC_SiR

iTrader: (31)

Also I know of someone who is working on a 3mm chassis set for the R3 that will have a couple of changes over the Stock Layout
-Dave