Alex Racing Barracuda R2 & R3
Tech Elite
iTrader: (1)
i tried switching the rear hubs around on the R2 for one qualifier just to loosen the rear end up a little bit cuz it pushed a touch in the corners and it slowed my lap times down almost half a second a lap....weird i guess the rearof this car likes being planted
Tech Elite
iTrader: (1)
Originally posted by R/C Anonymous
i tried switching the rear hubs around on the R2 for one qualifier just to loosen the rear end up a little bit cuz it pushed a touch in the corners and it slowed my lap times down almost half a second a lap....weird i guess the rearof this car likes being planted
i tried switching the rear hubs around on the R2 for one qualifier just to loosen the rear end up a little bit cuz it pushed a touch in the corners and it slowed my lap times down almost half a second a lap....weird i guess the rearof this car likes being planted
Tech Elite
iTrader: (1)
stock is 3...i have the xenon rear hubs and offset balls...so my original setup was 2.5 per side b4 i changed them ...after changing i turned it into 1 degree per side...just thought it was weird how such a small change made that much difference...maybe ill try adding more rear toe to get faster laps...hehe...its worth a shot...im already clicking off lap times about .5 to 1 second a lap faster then 99% of the other fast guys at the track with the Cuda...only my team Anonymous drivers keep up well except when fast guys from out of town show up then they're right up there too
Tech Lord
iTrader: (86)
O degree I don't think so..I would even like to get 1 and half degree and that would be great for me...I like it a little loose in the rear with the one way......
Now How do you get o degree in the rear
Now How do you get o degree in the rear
Tech Elite
iTrader: (1)
Originally posted by OVA
O degree I don't think so..I would even like to get 1 and half degree and that would be great for me...I like it a little loose in the rear with the one way......
Now How do you get o degree in the rear
O degree I don't think so..I would even like to get 1 and half degree and that would be great for me...I like it a little loose in the rear with the one way......
Now How do you get o degree in the rear
Not sure What sort the carpet is ............ some sort of felt i think.Quite fluffy in comparison to some other carpet tracks i've raced on.
Set-up is also much softer than any other carpet track i've run on.
We seem to be running on a similar set-up to most UK runners use on ashphelt with rubbers ?
Will be using the one-way to start with as at present i cannot find anywhere with diffs instock ??
Set-up is also much softer than any other carpet track i've run on.
We seem to be running on a similar set-up to most UK runners use on ashphelt with rubbers ?
Will be using the one-way to start with as at present i cannot find anywhere with diffs instock ??
Tech Elite
iTrader: (1)
my guess would be ozite carpeting.
when i first got my R2 last season i ran plaid and purple tires on ozite with the box setup. I currently had a XXXS before this . I figured the setup was way too soft for foam but i figured i'd try it anyway since we run on a low traction carpet( new carpet not many drivers) My lap times were a good .5 a lap faster then my foam setup XXXS which made me the fastest at the track at that time....I would try the kit setup but i am sure many others have a nice setup to try out
when i first got my R2 last season i ran plaid and purple tires on ozite with the box setup. I currently had a XXXS before this . I figured the setup was way too soft for foam but i figured i'd try it anyway since we run on a low traction carpet( new carpet not many drivers) My lap times were a good .5 a lap faster then my foam setup XXXS which made me the fastest at the track at that time....I would try the kit setup but i am sure many others have a nice setup to try out
Tech Elite
iTrader: (1)
ah yea... Mr. Speedtech has an e-mail
Tech Lord
iTrader: (86)
Hi RC A. Yes I do have off set balls in the rear..I do have 1 degree rear hub ...I should be paying more attention
Last edited by OVA; 03-14-2004 at 08:27 PM.
Tech Elite
iTrader: (1)
toe out in the rear?....never saw anyone do that
Tech Lord
iTrader: (86)
I'm sorry I mean ,I like to get maybe half or less degree toe in...I just want more toe out from the box stock
Tech Lord
iTrader: (86)
Anybody know where can I get o degree rear hub for R2
OVA:
if you have the offset ball studs, you should be able to correct the amount of toe at the rear. Use it in combo with the stock studs.
if you have the offset ball studs, you should be able to correct the amount of toe at the rear. Use it in combo with the stock studs.
Tech Lord
iTrader: (86)
GTO I useing 4 offset ball studs in the rear and I turn the mark in ,to make is narrow in the back and turn other 180 degree out the front and all I can get is half degree total different
Originally posted by OVA
Anybody know where can I get o degree rear hub for R2
Anybody know where can I get o degree rear hub for R2
Steve Wang