Alex Racing Barracuda R2 & R3
#9992
Regional Moderator
Originally posted by Randman
The rear diff wont work for the front?
The rear diff wont work for the front?
nope the front one way pulley is dead center and the rear is off set to one side
#9994
Heath,
Associated make a green spring but the black ones never made it into production for the TC3. The green spring is rated at 11.43 lb/in.
Johnny55,
The Rayspeed Red I find a touch heavy for outdoor use over here. I have a good setup running the mid span arms (hard) with Rayspeed Yellow on the front and Rayspeed Blue on the rear with no roll (sorry sway) bars fitted. This is on Sorex 24, Take Off CS22 and Pit Shimuzu D20. Its not warm enough over here to go anything further up the temperature range at the moment.
Hope this helps.
Associated make a green spring but the black ones never made it into production for the TC3. The green spring is rated at 11.43 lb/in.
Johnny55,
The Rayspeed Red I find a touch heavy for outdoor use over here. I have a good setup running the mid span arms (hard) with Rayspeed Yellow on the front and Rayspeed Blue on the rear with no roll (sorry sway) bars fitted. This is on Sorex 24, Take Off CS22 and Pit Shimuzu D20. Its not warm enough over here to go anything further up the temperature range at the moment.
Hope this helps.
#9995
Tech Adept
Originally posted by Ko Racer
this got skipped sorry bro you should be in great shape when you get the car its ready to hit the track except for some of your personal touches you may want to do .
Guys welcome a new cuda owner
this got skipped sorry bro you should be in great shape when you get the car its ready to hit the track except for some of your personal touches you may want to do .
Guys welcome a new cuda owner
#9997
My split personality R3...
#9998
a bit crowded with the BL overgrown ESC...pic changed.
Last edited by GTO2; 03-04-2004 at 01:16 AM.
bumper brace is stock. The bumper foam is from Eagle made for TA04 but fits nicely on R3.
Tech Elite
iTrader: (1)
Originally posted by GTO2
bumper brace is stock. The bumper foam is from Eagle made for TA04 but fits nicely on R3.
bumper brace is stock. The bumper foam is from Eagle made for TA04 but fits nicely on R3.
better view of the thing.
Tech Lord
iTrader: (86)
Nice paint job GTO2
Tech Elite
iTrader: (1)
Originally posted by GTO2
better view of the thing.
better view of the thing.
R/C Tech Elite Member
iTrader: (47)
Originally posted by GTO2
better view of the thing.
better view of the thing.