Cancun Tom

I'm needing Spool Hub A3322, Drive Pulley A3327, and drive hub (same part number which I think is a mistake in my manual)

Cancun Tom

Keith Billanti,
Awesome large format pictures. Very interesting how you mount your batteries. Is this more convenient to change them or another reason? Please what spur and pinion teeth are you running and 48 or 64 pitch? Last question, what rate springs are you using front and rear? Thanks.

liljohn1064

iTrader: (17)

I'll check my bin tonight and see what I have.

RAL

iTrader: (67)

Looking for the front LCD Drives LOSA3344 I believe?? If anyone has some (used is fine) please let me know!

bertrandsv87

iTrader: (2)

Losi losa3344 are very hard to get... I am always looking for them with very little luck...Good luck...

RAL

iTrader: (67)

I know! I tried years ago too... no luck

bertrandsv87

iTrader: (2)

I remembered just one polish site that claimed they had 24 of them, but the info was written in polish with no possible translation and no phone number visible, so I did not order at that time....

RAL

iTrader: (67)

Yeah the euro sites are hit or miss.

endurohero

iTrader: (12)

is this the same as what you are looking for?

http://www.stormerhobbies.com/cgi-bi...ns&pn=LOSA3333

DesertRat

iTrader: (2)

Those are the short ones, for the original JRX-S, and aren't long enough for a TC4.

Edit: Or a Type R.

Capelracer

iTrader: (3)

Good to see peeps are still running the type R.... I've just dusted off mine after 8 years!!
I'll try not to break a front lcd drive!

bertrandsv87

iTrader: (2)

I fitted those losa3333 drives to my m03: another BERT mod(not possible to steal)....

nexxus

iTrader: (315)

I just bought a type r 2nd hand but the seller didn't include the servo mounts, and the servo horn, which is one which screws seems very unique to this car. Any ideas where I can get a Losa1547?

DesertRat

iTrader: (2)

https://www.amazon.com/Team-Losi-Ste...ds=losi+type+r

like $6 for every plastic part in the steering.

bertrandsv87

iTrader: (2)

Those are nearly impossible to get, but they are pretty heavy:
Lcd steel dogbone: 4grams...
Lcd steel axle : 3grams...
Lcd steel coupler: 1gram...
That's 8grams of steel, while they would all weigh 3grams in aluminum 7075, or 5grams weight loss per corner, 20grams(almost two tc4 plastic ball diffs) total drivetrain rotational weight loss....wow... The only problem is that you will need to have the aluminum parts custom made... The steel parts are good for mod racing, but the aluminum pieces will shine in
Stock racing(17.5t)...
Good luck in your search...