bertrandsv87

iTrader: (2)

Most of the losi lcd's break the center coupler that can be found in the lcd rebuild kit(#losa3335) ...

bertrandsv87

iTrader: (2)

Thanks again J.Lee !!!......Happy racing.... The Losi type R needs a version 2....

Matt M.

iTrader: (26)

i have a nip oneway front diff if anyone is interested...miss this car....

Cancun Tom

I recently acquired a JRXS-R along with many spares. I have a ball diff for it but also another diff that is either a ¨spool"or one way". I need help on how to identify one from the other. The one I think is a spool has no places for diff balls but does have a place on each side for a diff ring and it can be tightened or lessened like a ball diff. I believe that I do not have a one way but don t know what it looks like. The manual does mention what a spool vs one way does but does not offer any pictures.

howardcano

iTrader: (37)

It should be obvious if you have a spool or a one-way by just giving the outdrives a twist by hand. The spool will be locked; the outdrives and the pulley are all connected directly as a single unit, and will turn together. The outdrives on a one-way spin freely in one direction, but lock to the pulley in the other direction.

While it may be fun to investigate using a one-way, personally I have never found it useful.

Cancun Tom

Thanks for the explanation Howard. Very much appreciated. We can always count on you to help a fellow RC enthusiast. Merry Christmas to you and yours.

howardcano

iTrader: (37)

Let us know if you need any snow mailed to you for the holidays.

MaxRain

iTrader: (2)

Has anyone tried if a 50mm version fits? IE Xray, or if you know what does please post

tudor39

iTrader: (5)

Was that an optional top deck/upper plate on your car Evan?

DesertRat

iTrader: (2)

Yes. That's an old exotek unit I got on clearance years ago, it's not really high-flex or anything like that, it's meant to be a more LiPo-friendly piece that deletes the side braces. It might save a few grams, but cutting down the stock top deck does as well.

team-srh1

iTrader: (4)

Anyone have a type R I'm looking for some parts Text me 6617335423

quickta

iTrader: (2)

pm sent

MaxRain

iTrader: (2)

After asking this question, I tested a set of 50mm X-ray and it would fit. You would have to use the same X-ray knuckles and even an X-ray c-hub. With a little plastic removal it will fit on the stock arms.

Cancun Tom

I have 3 of these chassis, 2 complete and 1 95% that I should have the missing parts for by the end of March.

liljohn1064

iTrader: (17)

Nice collection! What parts are still missing?