XX-4 Forum
#61
Hey guys, does the slipper take time to break in? I got the bolt loose to where the beveled washers are just snug enough not to move and the slipper does not slip. However, this is on a carpet and I'm using street type tires. Now with an alan wrench stuck in the slipper shaft hole through the chassis, I can move the slipper with my finger, but on the rug, I can't feel it slip. I'm absolutely 100% positive it's built correct, I double and triple checked.
Any ideas?
Thanks, Kevin
Any ideas?
Thanks, Kevin
#62
So I am pondering a though. Would any one here be interested in purchasing the class 8 race truck body for the xx4 if I started reproducing them. It would be close to the original design with only slight modifications like a spare tire or chevy front end on it. Just gaging intrest. I dont want to make a whole run of these and not be able to sell them.
#63
Tech Elite
iTrader: (26)
thought I'd post a link to a pic of my original, still undriven WE.
http://www.tamiyaclub.com/getuserima...00450830_3.jpg
http://www.tamiyaclub.com/getuserima...00450830_3.jpg
#64
That thing looks sweat
#65
Tech Elite
iTrader: (75)
Originally Posted by rusty-racing
So I am pondering a though. Would any one here be interested in purchasing the class 8 race truck body for the xx4 if I started reproducing them. It would be close to the original design with only slight modifications like a spare tire or chevy front end on it. Just gaging intrest. I dont want to make a whole run of these and not be able to sell them.
I'd buy one, but the big question is mounting for most people. I think the Street Weapon bumpers might be still available, but the XX4 truck body mounts are a nightmare to get. I was lucky to find one.
Has anyone with a truck body mount kit tried fitting just regular race truck bodies to the car? I might have to do some experimenting when the car is finished being built...
doug
#66
The truck and the street weapon mounts are the same. My local hobby shop still has quite a few of them left. I will be picking those up to make them avalible also.
#67
Come on fellas, we need more xx-4 porn on here. WTF? Get those cameras out ya lazy bastids
Here's a short boring vid of my xx-4. I just transplanted the GTB5.5 from my non worlds xx-4 into my freshly built one. I had to go to a parking lot as my street is ice for the next 6 months. The lot was a bit slick. So much so that I had trouble getting the car near the camera. The last run I almost took out my dv cam
I need a camera man. This thing is stoopid fast. Oh, don't mind the url, it's my wifes website. Don't ask
Right click save as please
http://www.thenaughtynurse.net/car/xx4.wmv
Here's a short boring vid of my xx-4. I just transplanted the GTB5.5 from my non worlds xx-4 into my freshly built one. I had to go to a parking lot as my street is ice for the next 6 months. The lot was a bit slick. So much so that I had trouble getting the car near the camera. The last run I almost took out my dv cam
I need a camera man. This thing is stoopid fast. Oh, don't mind the url, it's my wifes website. Don't ask
Right click save as please
http://www.thenaughtynurse.net/car/xx4.wmv
#68
Tech Champion
iTrader: (17)
Here you go then. This is actually a WE re-released kit that I put an older solid graphite chassis on. We run our track both wet and dry and when the track is dry it's like running on concrete. (literally ) The thin spots between the battery's on the WE chassis is a weak point if you short one jump. First day out I broke the chassis in two spots at that area. This chassis should be much better for that reason. I opened up the hole in the bottom for the motor so I could run the lowered motor mount.
Last edited by Jon Kerr; 06-07-2007 at 05:27 PM.
#70
Parts for one are easly found since losi recently started reproducing them and also just rereleased 1000 worlds edition xx4. I waould say 75 bucks for what your looking at since lately they have been going for 120-250 on ebay for fairly shaped ones. Take a look for yourself on ebay their are a few on there right now that could give you guys an idea
#72
No problem man
#73
Here is my freshly built xx4-we re-release. just need to drop in the sphere and off we go!
#74
Originally Posted by Doughty
Here is my freshly built xx4-we re-release. just need to drop in the sphere and off we go!
Thanks, Kevin
#75
I've seen that LRP brushless motor in their main website as their new release, the vector brushless. (3-star). But I saw it on a hongkong online hobbyshop months before. Weird?..