Hot Bodies D413 1/10 4WD Buggy
#6198
Tech Adept
iTrader: (19)
Ran my D413 (reedy setup) for the first time last night. What a blast. I only ran two heats, no practice at all, never even drove a 1/10 4wd buggy and let me say this thing is glued to the track. I'm not yet able to drive the car to it potential yet. Im so used to 17.5 sc and buggy. Running a 7.5t motor provide plenty of snap, car jump perfectly -
Can't wait to get back out there -
Can't wait to get back out there -
#6199
Does anyone know if the Avid floating servo mount works with the stock chassis?
#6201
Tech Prophet
iTrader: (84)
So i have a couple hundred laps on my d413 with the Avis chassis and RC shox rack and 2 stage pistons. The Avid chassis definitely keeps the weight lower. A plus was also my temps dropped. After first I thought it was my imagination, but I could feel the heat in the chassis after it moved gown the motor mount to the chassis. I am running on high bite and it was fantastic. The RCShox pistons are so freaking plush to drive on. They beat those kit pistons hands down. I was running 37.5/30 oils with them. The steering rack has held up like a champ. Also, I still feel like the RCShox rack tighten up the car. We have retarded traction and I could feel it.
#6203
Is anyone running a tekin rs pro gen 1 in their buggy? I'm just curious if anyone has had good luck with them? I did a search and saw someone say that you needed two capacitors
Forgot to mention, I'll be running a tekin 6.5 gen 2
Forgot to mention, I'll be running a tekin 6.5 gen 2
#6204
Tech Regular
iTrader: (10)
Not exactly the same, but I run the ESC and same motor in my 22-4. It was my back up gear. It has been running fine with one capacitor. Nothing really got any hotter. I just don't like the esc as much as the R10s that I run in my other cars. The throttle response just isn't as smooth.
#6205
Not exactly the same, but I run the ESC and same motor in my 22-4. It was my back up gear. It has been running fine with one capacitor. Nothing really got any hotter. I just don't like the esc as much as the R10s that I run in my other cars. The throttle response just isn't as smooth.
Ok thanks, my set up is also kind of back up electronics. Just want to make sure Ill be able to race it.
#6206
who makes or what are these xgear spring ty has on his setup sheet
#6207
Tech Initiate
#6208
hey guys i know a few of you have been wondering if anyone has set the car up as saddle pack config. well here it is. i have driven both cars back to back with a similar setup, and can say that the saddle pack setup is a little more stable than the shorty setup but however it is not as agile as you can imagine being a little heavier. i did have to grind the steering rack slightly to clear the sensor port on the motor but i dont think it will compromise the strength of the rack.
i apologize for the not getting a better shot of the rack. i will get one when i go to the track next.
i apologize for the not getting a better shot of the rack. i will get one when i go to the track next.
#6209