really hope tekno release a thicker body, the stock ones are so flimsy.

in the meantime, i had this old proline 0.60 lexan body laying unused, so a quick paint job and some extra holes to make it fit and its ready to race

http://i1015.photobucket.com/albums/...ps42773a53.jpg

http://i1015.photobucket.com/albums/...ps64e1b5d7.jpg

http://i1015.photobucket.com/albums/...ps7ab9c649.jpg

nice body dude!

hello everyone
I am about to pull the trigger on a et48 I just wanted to know what other body have you try on the truggy which one fits good

Ok guys, currently in the build process and I am experiencing some difficulties. (First time build).

Basically its a very smooth build but the front and rear camber links are turning out to be a nightmare to screw together. I dont really have the proper tools to do so, which is why they start feeling VERY VERY tight and I cant screw them in enough to get the right lenghts. What tools do people use to assemble the front rear camber links? ALSO, is there any technique/tip/tricks involved when assembling the camber links? ANY sort of advice would help as simply trying to muscle then in isnt working for me AT ALL.

Also I understand that the camber ends are threaded as we screw the links in. Is that how its supposed to go down? Or am i supposed to thread them with something else before screwing the links in? I had no need to do so up till now in the process (as every plastic is freshly threaded when I insert screws), but maybe I should now? ANYWAY, HELP PLEASE! SOS CALL!


Eagerly waiting for replies! Thanks in advance.

put a drop of oil on the threads. simple tools....crescent wrench to hold rod and twist on the ends with your hands.

I get a body reamer and ream out the rodends so the turnbuckles are easier to start,I put black grease in the rodend before I run the turnbuckles in.

I like to chuck the turnbuckle into a drill and pre-thread all of my rod ends. Make sure to do the reverse threads on half of them and keep them separated so not to mix them up.

I need to get off my lazy butt lol...

http://i101.photobucket.com/albums/m...ps48c25a48.jpg

I would say so!

Just wanted to give u guys an update on my first outdoor race w my ET. I had to run w the nitro truggys and took TQ for the day. A 20 min A main and i made the whole race one 1 4s lipo and took the win w a lap on the field!!!!! I used munrath setup posted earlier and it was dialed!!!! This truck is awesome!!!

Heres my ET48 gettin it done!!!

That's great! Did they make you take a pit stop or two? What size battery and what did it take to charge it?

Sweet ride there.

I did a 20sec stop and go pit....i was using a trinity 6950Mah 4s pack. I put 5500Mah back in it. Think i coulda went another 5 mins easily!!!

What esc/motor and esc settings?