You're welcome Brandon.

I'm running a Tekin 2050kv. What gearing should I start with? I cannot find any information on gearing.

Thanks in advance.

I run 15/45 with a tekin 2050

Thanks for the info. I will start there.

i just bought one of these over the weekend and itll be here soon. But there arent alot pics in this thread. You guys should start posting more pics in this thing.

Just wanted to give a BIG thanks to Jason R/C. Finally got my 3.0 E on the track this weekend, and he gave me setup tips that got this buggy doing want I wanted. The 3.0E is an excellent buggy. So easy to put this buggy where you want it. I was surprised how well it responded to each setup change. The T8i Tekin system is a perfect match, IMO. Flawless. A Thanks also to Casper and Ryan for your tips as well.

What up guys! Thanks alot old carpet glad I could help. You stand correct this buggy is dialed! With that being said please subscribe to my channel I just uploaded another video of my 3.0 in action!!

https://www.youtube.com/channel/UCsI...MRfs3BDixdGUCg

link fixed

So ive been looking at esc's for this thing and I am a Orion guy now but IDK about the R8/HW esc. I saw a lot going towards the Gen2 rx8 but also heard there might be a new Orion esc soon for 1/8 buggies?

Also, I am a Trinity fan and have your guys seen or used the D8's in this 3.0? thanks

vr6 im currently running a R8 and a D8 in my car. I like the R8 alot. however if i could rebuy i may get eh tekin gen 2. that speedo is really nice. however nothing ive driven feels like a D8 motor. they are amazing. i run a 1950 and its more then enough inside and outside

Hi Guys...new 8ight 3.0 owner here. I have a Savox 1257 in my parts box. Will this work on the 3.0?
http://www.savoxusa.com/Savox_SC1257...avsc1257tg.htm

I also have a aluminum servo arm that fits it. Is it ok to use that servo arm along with a servo saver?
Thanks

I ran that servo and the 1267 in my 3.0 ill be honest they are slow for an ebuggy. But thats my opinion. It will work yes. I'd take a look at some high voltage servos though. Night and day differences.

Thanks! Will look into it!

the 1267 is high voltage and seems to work well for me.

Seems the 1257 I have and the 1267 you have are not that far apart as far as the stats show....

http://www.savoxusa.com/Savox_SC1267...avsc1267sg.htm

http://www.savoxusa.com/Savox_SC1257...avsc1257tg.htm


This is the one a friend told me to install...
https://www.spektrumrc.com/Products/...odID=SPMSS6100

May take it back if the 1257 will work.

Removed the receiver box, installed a new servo and a T8i 1950.