4LikesTeam Associated B4.2 Thread
07-26-2013 | 08:37 AM
#7307
Tech Apprentice
iTrader: (1)
Joined: Nov 2010
Posts: 65
i run a 69/34 for blinky class with a hobbywing v3.1 speedo and killshot at 40 degrees endbell timing 5 minute run i come off at 100 degrees or less, if motor temps are too high with your setup just drop a couple teeth on pinion or go up 1 on spur i noticed someone told you to drop pinion for more top speed that is backwards a larger pinion will give you more top end and smaller spur will give you more top end
Last edited by calvord; 07-26-2013 at 08:38 AM. Reason: fingers faster than brain
07-26-2013 | 08:39 AM
#7308
Suspended
iTrader: (23)
Joined: May 2013
Posts: 1,235
From: Chandler, AZ
i run a 69/34 for blinky class with a hobbywing v3.1 speedo and killshot at 40 degrees endbell timing 5 minute run i come off at 100 degrees or less, if motor temps are too high with your setup just drop a couple teeth on pinion or go up 1 on spur i noticed someone told you to drop pinion for more top speed that is backwards a larger pinion will give you more top end and smaller spur will give you more top end
Mine starts out at 105-107 before it even gets on the track.
07-26-2013 | 09:32 AM
#7310
Tech Legend
Joined: Aug 2001
Posts: 22,595
From: TRCR Modified Driver
Last week end @ Hot Rod
http://www.youtube.com/watch?feature...&v=ceD-Qa87Aqc
Ae's mid B4 looking good ....
3rd round was really good , great racing ...
Ae's mid B4 looking good ....
3rd round was really good , great racing ...
Last edited by Wild Cherry; 07-26-2013 at 09:50 AM.
07-26-2013 | 11:52 AM
#7320
Tech Master
Joined: Jul 2011
Posts: 1,570
From: Kaohsiung City, Taiwan
That's what I thought till I snooped around on LiveRC...
Looks like they are possibly using an extended Centro C4.1. At least, the gearbox looks to be from the C4.1. For comparison, here is the C4.2:
http://www.redrc.net/2013/06/centro-...tor-2wd-buggy/
http://www.redrc.net/2013/06/centro-...tor-2wd-buggy/