R/C Tech Forums - Tekno SCT410 Thread

http://www.teknorc.com/shop/tkr5017-...etal-anodized/

I noticed in the option parts, that the hinge pin holders only come in pairs.
Since we already have 1 on the truck (thanks for adding that), is there a plan to make the other half available separately?

I am in for just the FR and RR RF. Maybe sell a upgrade kit Tekno?

MattP

01-21-2013 02:59 PM

Quote:

Originally Posted by justpoet (Post 11708468)

Yep, 15t should be good to start with on either a Pro4 4600 or an SC411 5200. I've been running the same gearing on both for a while now (was 13t in my SCTE). I seem to pull a bit more power now than with the 13t on the SCTE and gain a little more speed, but I'd say it is the best starting point for anything but a wide open outdoor or really tight indoor track.

Thanks....:nod:

teeforb

01-21-2013 02:59 PM

Can someone point me to a link to wheels that works with the plastic hexes?

superslow

01-21-2013 03:05 PM

http://www.amainhobbies.com/product_...TEN-SCTE-22SCT

These are what I bought in different colors too

teeforb

01-21-2013 03:09 PM

Quote:

Originally Posted by superslow (Post 11708697)

http://www.amainhobbies.com/product_...TEN-SCTE-22SCT

These are what I bought in different colors too

Have you tested them? Do they work?

spunkysandoval

01-21-2013 03:10 PM

I just put some SC104x4 Aluminum wheel hexes on the truck and i measured them up. They are 1.7mm wider each side than the stock setup. I filed the back down and made them 1.3mm wider than stock per side. Hopefully that is still in the legal limit.

Barry Baker

01-21-2013 03:12 PM

This is what I run on my truck..They fit awesome and work great!
http://www.amainhobbies.com/product_...ack-2-TEN-SCTE

Barry Baker

01-21-2013 03:14 PM

BTW...Hopefully I will have a setup on the Tekno website later this week. I am sure Danny will share it when I get it up there. Busy at work and have the Reedy race this week! The truck is amazing though! Cant wait to race it again!

superslow

01-21-2013 03:16 PM

Bakerman in the house unreal! U need a flame paintjob like on ur tc3 back in the day! :nod:

Barry Baker

01-21-2013 03:20 PM

Its coming! I have that paint on all my other cars again...just need my short course to get painted right now. It at the painter!

jamr1130

01-21-2013 03:22 PM

Quote:

Originally Posted by Matthew_Armeni (Post 11708244)

Check the EB48 thread, I'm pretty sure a guy in there was able to get his Activ8 to fit. And since SC's use shorter motors you actually have more space for the ESC.

Thanks. I checked out the EB48 thread and there are a few running the Activ8. It's a tight fit from what they say but it fits and that's good enough for me.

Marzac2

01-21-2013 03:32 PM

Quote:

Originally Posted by justpoet (Post 11708456)

Not at this point. Having a spare front isnt a bad thing though. May come in handy some day.

jones8352

01-21-2013 04:29 PM

Quote:

Originally Posted by Cain (Post 11707062)

was these:

http://www.smc-racing.net/index.php?...product_id=130

I bought two of the SMC 6500mah 2s packs this week. I normally use the Gen Ace 5000mah 50c 2s packs and I really wish I would have saved my cash and stayed with Gen Ace. The SMC packs were soft, weak acceleration compared to the GA. On our indoor track (75'x35') I was right at .70 slower with the SMC packs. That's a huge loss in lap time. I sold the packs at the track the first day I tried them.

teeforb

01-21-2013 04:37 PM

Quote:

Originally Posted by justpoet (Post 11708456)

I was thinking the same thing. I think buying the alum hinge pin holders would be a great option. Typically, the front hinge pin holder are the ones that break. The rears can stay plastic.

jpas	01-21-2013 04:56 PM

At first the price of $399 didn't seem too bad, but when you look at adding aluminum hinge pin holders ($43 x 2 front & rear = $86), aluminum ackerman $25 and aluminum shock caps......

They should have just included at least the hinge pin holders and charged $50 more, a few people have already tore up the plastic parts.

All times are GMT -7. It is currently 10:47 PM.

Page 159 of 1780

159

Show 40 post(s) from this thread on one page