|
Originally Posted by rice_man
(Post 11671747)
In my case it's the thing that holds the transmitter. :D Not much else.
Where have you been Teeforb? I've been around. Racing both electric and nitro. |
Hey Teeforb, hope to see you racing again soon.
Honestly, Its tough to find a weak spot on this truck. Ive put several hundred packs on it and other than wearing out a front bumper and damaging a few bodies (thanks riceman for the new paint) the only part I have broke is an aluminum turnbuckle from a different manufacturer. I was trying it for testing purposes, but for obvious reasons decided to take them off. As far as upgrades, i would recommend an aluminum servo horn. serpent and racers edge both make clamping horns that work well. Shortly we will have several upgraded/lightened parts available but i would recommend replacing some of the screws in low stress locations with aluminum as well as putting in aluminum captured balls. The air control guards are a nice touch as they help truck by keeping unwanted air from coming under the body and causing a parachute affect when jumping. Hope this help and feel free to stop by and hi at the track. -Matt
Originally Posted by teeforb
(Post 11671273)
Tekno team. What are the weak points of the car? What would be the first thing that needs an upgrade?
Thx |
Thx for the info!
What's the weight of this compared to a lightened losi?
Originally Posted by MattDub
(Post 11672321)
Hey Teeforb, hope to see you racing again soon.
Honestly, Its tough to find a weak spot on this truck. Ive put several hundred packs on it and other than wearing out a front bumper and damaging a few bodies (thanks riceman for the new paint) the only part I have broke is an aluminum turnbuckle from a different manufacturer. I was trying it for testing purposes, but for obvious reasons decided to take them off. As far as upgrades, i would recommend an aluminum servo horn. serpent and racers edge both make clamping horns that work well. Shortly we will have several upgraded/lightened parts available but i would recommend replacing some of the screws in low stress locations with aluminum as well as putting in aluminum captured balls. The air control guards are a nice touch as they help truck by keeping unwanted air from coming under the body and causing a parachute affect when jumping. Hope this help and feel free to stop by and hi at the track. -Matt |
We are able to get the weight of the truck to about 5.7lbs but we've found that 6.3lbs is best for performance and should be easy to obtain. You'll find the truck drives extremely well out of the box and doesn't need much weight removed, if any.
|
Is the weight still 6.8 out of the box?
|
Originally Posted by MattDub
(Post 11672399)
We are able to get the weight of the truck to about 5.7lbs but we've found that 6.3lbs is best for performance and should be easy to obtain. You'll find the truck drives extremely well out of the box and doesn't need much weight removed, if any.
|
What are the track conditions at SDRC ? Is it high bite?
|
Originally Posted by umpy907
(Post 11672901)
What are the track conditions at SDRC ? Is it high bite?
|
Originally Posted by umpy907
(Post 11672901)
What are the track conditions at SDRC ? Is it high bite?
|
Anyone use the trinity 4800kv. Any thoughts? It's the 5mm shaft version, right?
|
Did couple of battery packs at SDRC, this truck can TURN!!!!!!!!!!!
Need to do more driving but at this point it's just a little bit tale happy on power out of turn, I'll try to get it dialed using my radio before I do any setup change. Great job Tekno |
Can this fit the nano tech hard case lipo?
What's max width and length? |
Originally Posted by teeforb
(Post 11673065)
Can this fit the nano tech hard case lipo?
What's max width and length? |
Does anyone know how much lighter the Lightened Chassis (TKR5000F) is?
|
Originally Posted by fireflysti
(Post 11673051)
Did couple of battery packs at SDRC, this truck can TURN!!!!!!!!!!!
Need to do more driving but at this point it's just a little bit tale happy on power out of turn, I'll try to get it dialed using my radio before I do any setup change. Great job Tekno |
| All times are GMT -7. It is currently 08:26 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.