Xray XB4 thread
Tech Regular
iTrader: (13)
Hello Freeski,
Thank you for offering my friend. I was able to get a pair from Amain. Had a 10$ credit as well thus $3 and change shipped. Thanks again for the offer as I appreciate it.
No worries Symmetricon. Thanks for the offer my friend. I saw gticlay's response and quickly hit Amain's sit. Luckily I was able to order a pair of 1 dot rears. Even better I had a store credit of $10, thus I got them for $3 and change shipped. Thanks again for the offer as I greatly appreciate it.
The XB4 forum here is really filled with good peps.
Thanks gticlay for the heads up on Amain having rear 1 dots.
Tech Rookie
Do any of the previous bodies fit the new xb4 ( 2014, 2015)?
Tech Rookie
Looking for different options for bodies, aftermarket!
Tech Elite
iTrader: (27)
Tech Regular
iTrader: (13)
I just joined the xray family got a 2015 xb4 and I'm looking for suggestions on upgrades for durability and performance. Also I drive on a hard pack track with light dust and id say it's low on traction, at best med traction. What's a good setup to start with.
Tech Initiate
iTrader: (7)
My 2015 is box stock with the exception of the exotek cvd collars. i have not broken any parts. I am an average driver at best, that practices about once a week. You shouldn't need a ton of spare parts. maybe just a set of front and rear arms and maybe some front/rear hinge pins. I had a similar experience with the 2014 version. the only part i broke was a front bulkead from a rogue car running the wrong direction on the track.
Tech Addict
iTrader: (31)
My parts are starting to show up can't wait to get started on this build!
Tech Elite
iTrader: (15)
Why is everyone switching to 1 dot? Just trying to understand. Stock springs too stiff?
Tech Regular
The '15 shell will fit the '16, although the body post holes don't line up with the marks.
The '13-14 shells are too narrow at the rear to fit the new car correctly.
I've not seen any aftermarket shells for the '16 yet, apart from maybe the Penguin, but I think it's quite similar to stock.
The '13-14 shells are too narrow at the rear to fit the new car correctly.
I've not seen any aftermarket shells for the '16 yet, apart from maybe the Penguin, but I think it's quite similar to stock.
Tech Addict
iTrader: (11)
The '15 shell will fit the '16, although the body post holes don't line up with the marks.
The '13-14 shells are too narrow at the rear to fit the new car correctly.
I've not seen any aftermarket shells for the '16 yet, apart from maybe the Penguin, but I think it's quite similar to stock.
The '13-14 shells are too narrow at the rear to fit the new car correctly.
I've not seen any aftermarket shells for the '16 yet, apart from maybe the Penguin, but I think it's quite similar to stock.
XB4 Gearing
Hi guys,
I just bought my first Xray off road car....an XB4-14. I can't find an Xray motor gearing chart. Does anyone have a gearing recommendation for a 10.5 Novak motor in this buggy? Thx
I just bought my first Xray off road car....an XB4-14. I can't find an Xray motor gearing chart. Does anyone have a gearing recommendation for a 10.5 Novak motor in this buggy? Thx
I am wondering since I have been watching for weeks and weeks for 1.6 and 1.7 shock Pistons and nobody is getting them in stock if for low to med bite track the 2+2 (2-1.5+ 2-1.1 and the 2-1.6+2-1.1) Pistons would be just as good or would those be too soft? Or maybe I could use the 1.5/1.1 Pistons in the front and rear?
I am wondering since I have been watching for weeks and weeks for 1.6 and 1.7 shock Pistons and nobody is getting them in stock if for low to med bite track the 2+2 (2-1.5+ 2-1.1 and the 2-1.6+2-1.1) Pistons would be just as good or would those be too soft? Or maybe I could use the 1.5/1.1 Pistons in the front and rear?