Kyosho Ultima RB6 & RB6.6 Car Thread
|
|||
#781
Tech Elite
iTrader: (166)
here's how I mounted all the electronics:
I flipped the receiver, cap, and switch on their sides and mounted them to the side guard. It doesn't look like it in the pic but there's a decent gap between the receiver wires and the battery. I was thinking about mounting the receiver above the ESC but would like to keep that area clear to give the ESC adequate cooling. We'll see how this holds up tomorrow.
I flipped the receiver, cap, and switch on their sides and mounted them to the side guard. It doesn't look like it in the pic but there's a decent gap between the receiver wires and the battery. I was thinking about mounting the receiver above the ESC but would like to keep that area clear to give the ESC adequate cooling. We'll see how this holds up tomorrow.
#782
If your looking for an extra kit, I'd call every place that had pre-orders. I was number 56 @amain and they were scheduled to get like 80+.. After 7 days they'll sell any kits for guys that flaked. But you have to make sure your on the list.. That's how I got my DEX410 v3 last year.
Good luck
Good luck
#783
Tech Addict
iTrader: (17)
Has anyone mounted up a LRP SXX esc or a standard size Spektrum RX in the car yet? Just curious to see what kind of space is available before mine arrives. I might have to switch over to an MRT transponder in the buggy, I don't trust an RC3 to push signal through both a metal-cased, metal-geared servo and an aluminum chassis. Guys who run 22's locally have had trouble with the RC3's mounted on the servos.
#784
Damn I got my local hobby shop to order me one on Monday and after talking to Kyosho America they sold out until movember or December..
Anyone know where they may have one available? That sucks I was more excited than ever thinking I'll have one for a local shoot out event
Anyone know where they may have one available? That sucks I was more excited than ever thinking I'll have one for a local shoot out event
http://www.speedtechhobbies.com/inde...roduct_id=1387
Cheers,
Jeff
#785
Tech Legend
iTrader: (1212)
Has anyone mounted up a LRP SXX esc or a standard size Spektrum RX in the car yet? Just curious to see what kind of space is available before mine arrives. I might have to switch over to an MRT transponder in the buggy, I don't trust an RC3 to push signal through both a metal-cased, metal-geared servo and an aluminum chassis. Guys who run 22's locally have had trouble with the RC3's mounted on the servos.
Ohhh and my kit got here yesterday I have a BUTTTTT load(22 pair) of mounted front tires, new, 1 run, or a few runs if anyone is just getting into kyosho and need 12mm fronts.
#786
Tech Regular
iTrader: (14)
Jeff,
Did you build one yet?
I'd like to hear your thoughts on the RB6?
Did you build one yet?
I'd like to hear your thoughts on the RB6?
We have a few kits left in stock and ready to ship. All the spares and hopups are available, too.
http://www.speedtechhobbies.com/inde...roduct_id=1387
Cheers,
Jeff
http://www.speedtechhobbies.com/inde...roduct_id=1387
Cheers,
Jeff
#787
Moderator
iTrader: (470)
Join Date: Nov 2009
Location: North Carolina by way of SoCal!
Posts: 4,785
Trader Rating: 470 (100%+)
I believe that Jeff graciously filled an order with his kit. Awesome guy!
#789
Tech Elite
iTrader: (166)
Jeff is very good. Wont deal with anyone else. Got my RB6 yesterday build went great, MT4 receiver not so great, its now on top of the battery. Hope nobody lands on me. Hopefully by the end of the month I will have my KO radio and these problems will all go away. Something else, yesterday I was told that a lot of people are rewiring their R10 Pro's with 14 gauge wire to make it easier to mount in the back. Mine barely fits right with the standard 12 gauge wire.
#790
Tech Addict
Jeff is very good. Wont deal with anyone else. Got my RB6 yesterday build went great, MT4 receiver not so great, its now on top of the battery. Hope nobody lands on me. Hopefully by the end of the month I will have my KO radio and these problems will all go away. Something else, yesterday I was told that a lot of people are rewiring their R10 Pro's with 14 gauge wire to make it easier to mount in the back. Mine barely fits right with the standard 12 gauge wire.
Sanwa 451R etc. in mid config
Tekin RS Pro for this one, normally I run Orion R10
#792
Thanks, guys!
A local store cancelled several RB6 kits from Kyosho. We were able to acquire a couple more cases. Kyosho is out of RB6's for a couple months.
I'll be building one and comparing all the new parts vs. old parts for you guys to see. Stay tuned.
A local store cancelled several RB6 kits from Kyosho. We were able to acquire a couple more cases. Kyosho is out of RB6's for a couple months.
I'll be building one and comparing all the new parts vs. old parts for you guys to see. Stay tuned.
#793
Tech Elite
iTrader: (77)
I will post a pic later but all my stuff fit awesome. Shorty lipo is the key. I went 1015 servo, then my airtronics receiver. Lipo and then the LRP SXX fit perfect with the cap hidden under the shock tower.nothing had to go on the sides. All balanced right down the middle.