Kyosho Ultima RB6 & RB6.6 Car Thread
|
|||
#3166
spare parts?
What are some spare parts I should definitely carry for the RB6?
#3169
If you are running the aluminum rear suspension hangers... you are set. Every other piece on the car is only going to break if you do something you really shouldn't of done. Nothing else on the car is broken "over easily". The one piece you may want to toss in your bag anyway, is the rear upper bulkhead.
http://www.amainhobbies.com/product_...Upper-Bulkhead
Now, if you don't have access to parts at your track, I would also toss in a full set of arms, caster blocks, and front shock tower.
http://www.amainhobbies.com/product_...Upper-Bulkhead
Now, if you don't have access to parts at your track, I would also toss in a full set of arms, caster blocks, and front shock tower.
#3170
If you are running the aluminum rear suspension hangers... you are set. Every other piece on the car is only going to break if you do something you really shouldn't of done. Nothing else on the car is broken "over easily". The one piece you may want to toss in your bag anyway, is the rear upper bulkhead.
http://www.amainhobbies.com/product_...Upper-Bulkhead
Now, if you don't have access to parts at your track, I would also toss in a full set of arms, caster blocks, and front shock tower.
http://www.amainhobbies.com/product_...Upper-Bulkhead
Now, if you don't have access to parts at your track, I would also toss in a full set of arms, caster blocks, and front shock tower.
#3171
What's the part number for the tiny tool that we use to assemble the K shocks? It's 158 in the instructions manual, but i don't find the reference...
Cheers
Cheers
#3172
#3173
Tech Elite
iTrader: (114)
Drove my RB6 for the first time last night WOW cars amazing, I just need to calm my steering down, this thing can turn on a dime! I have question what type of screws are on car metric/standard? I stripped bolt one it adjusting pinion. Also what rear Rear RF and rear hinge pin holder do I need wanting to get the alum ones trying to make sure I get right ones
#3174
Tech Champion
iTrader: (107)
#3176
Tech Champion
iTrader: (107)
Drove my RB6 for the first time last night WOW cars amazing, I just need to calm my steering down, this thing can turn on a dime! I have question what type of screws are on car metric/standard? I stripped bolt one it adjusting pinion. Also what rear Rear RF and rear hinge pin holder do I need wanting to get the alum ones trying to make sure I get right ones
#3177
Is anyone running a full size stick pack in the mid-motor config? I just don't see how the battery is held in place on the motor side. The instructions only show to install the front battery mount. Seems as if this thing is going to slide all over the place.
#3178
Tech Fanatic
iTrader: (7)
Randy - I believe the part number you're looking for is UM726. It's specified as a mid-motor part, but the bubble callout 132 in the manual points to this number in the parts list rather than UM508C, which would be for the old thinner toe blocks. The image on the page should show you that the part you're looking for is on the right side of the tree.
http://www.kyoshoamerica.com/Sus-Hol...r_p_11159.html
I had to do some digging myself to figure it out - I remember that the RF2 block was the only piece from that tree that I used in the build.
http://www.kyoshoamerica.com/Sus-Hol...r_p_11159.html
I had to do some digging myself to figure it out - I remember that the RF2 block was the only piece from that tree that I used in the build.
#3179