5LikesSC10 4x4 Thread
01-15-2012 | 12:45 AM
Tech Legend
Joined: Aug 2001
Posts: 22,595
From: TRCR Modified Driver
New Ae Factory Team Edition Sc 10 4x4
This changes everything for some ....
New Ae Graphite plastic , new stiffer chassis , arms ect ...
No more brace needed.....
New Ae multi slipper system ....
Team shocks, Ti Rod's, ect ....
All I know so far , cept ....
Maybe available real soon , like next month or so....
Remember !!!
You heard this first on RcTech .....
New Ae Graphite plastic , new stiffer chassis , arms ect ...
No more brace needed.....
New Ae multi slipper system ....
Team shocks, Ti Rod's, ect ....
All I know so far , cept ....
Maybe available real soon , like next month or so....
Remember !!!
You heard this first on RcTech .....
01-15-2012 | 12:55 AM
This changes everything for some ....
New Ae Graphite plastic , new stiffer chassis , arms ect ...
No more brace needed.....
New Ae multi slipper system ....
Team shocks, Ti Rod's, ect ....
All I know so far , cept ....
Maybe available real soon , like next month or so....
Remember !!!
You heard this first on RcTech .....
New Ae Graphite plastic , new stiffer chassis , arms ect ...
No more brace needed.....
New Ae multi slipper system ....
Team shocks, Ti Rod's, ect ....
All I know so far , cept ....
Maybe available real soon , like next month or so....
Remember !!!
You heard this first on RcTech .....
01-15-2012 | 01:02 AM
Tech Regular
Joined: Dec 2010
Posts: 289
From: SoCal
Nope. Didn't fix the problem
Anyone know why the Pro 4 would sit under Throttle and make feint stutter noises. If I spin the shaft it will kick over and spin on throttle but the motor is almost a little glitchy in it's rotation. (rythmatic glitchy)
MMP Speedo
Pro 4
Tekin Sensor wire
In Smart Sense mode
Full battery
wired exactly as stated
~whole system begins to heat up as I test fixes
Anyone know why the Pro 4 would sit under Throttle and make feint stutter noises. If I spin the shaft it will kick over and spin on throttle but the motor is almost a little glitchy in it's rotation. (rythmatic glitchy)
MMP Speedo
Pro 4
Tekin Sensor wire
In Smart Sense mode
Full battery
wired exactly as stated
~whole system begins to heat up as I test fixes
The older MMP's had issues with the sensor on the board and would sometimes break off the board if you pushed the sensor plug in to hard. The newer style appears to be mounted better to the board.
01-15-2012 | 01:37 AM
I had that happen to me once. The problem was the battery teminals shorted briefly and zapped the MMP board. I could plug it in afterwards and the lights would light but no sound. Would not spin the motor. Battery and motor wires got hot. I unplugged and shipped it off to Castle. I had a backup and it works perfectly fine.
The older MMP's had issues with the sensor on the board and would sometimes break off the board if you pushed the sensor plug in to hard. The newer style appears to be mounted better to the board.
The older MMP's had issues with the sensor on the board and would sometimes break off the board if you pushed the sensor plug in to hard. The newer style appears to be mounted better to the board.
I'm buying a new one tomorrow. I'm not waiting Till I get it back.
01-15-2012 | 02:08 AM
Tech Master
Joined: Jul 2005
Posts: 1,287
From: Sweden/Stockholm
Nope. Didn't fix the problem
Anyone know why the Pro 4 would sit under Throttle and make feint stutter noises. If I spin the shaft it will kick over and spin on throttle but the motor is almost a little glitchy in it's rotation. (rythmatic glitchy)
MMP Speedo
Pro 4
Tekin Sensor wire
In Smart Sense mode
Full battery
wired exactly as stated
~whole system begins to heat up as I test fixes
Anyone know why the Pro 4 would sit under Throttle and make feint stutter noises. If I spin the shaft it will kick over and spin on throttle but the motor is almost a little glitchy in it's rotation. (rythmatic glitchy)
MMP Speedo
Pro 4
Tekin Sensor wire
In Smart Sense mode
Full battery
wired exactly as stated
~whole system begins to heat up as I test fixes
Yoo mr CoyoteSlash, what i can see in your spec you are running a sensor motor with the MMP Spedo?, if yes, you should not run it in Smart Sense mode..jack in the link and change to Sensor mode only.
Thats my tip
best regards Thomas P
01-15-2012 | 06:14 AM
Couple of weeks out now for my 4x4. I cant wait. Couple people at my track are trying to talk me out of the sc10 to go with the losi. That just makes my heart hurt thinking about buying a losi( sorta like kicking a puppy and a kitten). One of my local fast guys runs the sc10 and he was in the upper bmain at the spektrum race. So I have a good source of tuning info and secrets
. And so far I have not pissed him off with stupid questions and interruptions(great guy).
On the list for option parts are center diff, chassis brace, sway bars, and ?? I know Im forgetting something. lol gonna run stick packs to start. Thanks to everyone for all the info you share here. I have read 80%ish of the info here. I feel with all this info I should get it dialed quick.
. And so far I have not pissed him off with stupid questions and interruptions(great guy).On the list for option parts are center diff, chassis brace, sway bars, and ?? I know Im forgetting something. lol gonna run stick packs to start. Thanks to everyone for all the info you share here. I have read 80%ish of the info here. I feel with all this info I should get it dialed quick.
01-15-2012 | 06:18 AM
01-15-2012 | 06:34 AM
Tech Fanatic
iTrader: (5)
Joined: Dec 2005
Posts: 866
From: Pacific Northwest
01-15-2012 | 06:55 AM
i made one for my CAster S10 which would fit but it was a real pain to create!! Not much demand for the 4wd class although it seems to be picking up. the outdrives are where it gets costly.
01-15-2012 | 07:05 AM
Tech Fanatic
iTrader: (5)
Joined: Dec 2005
Posts: 866
From: Pacific Northwest