|
Originally Posted by Dano628
(Post 10100823)
Have you tried Exotech chassis ? I took .7 a sec off my laptimes on a 15 sec laptime track . Yes it cost a $100.00 but I didn't have to buy new batteries either . IMO thats pretty good bang for your buck .
will consider then ... put the saddles in your Exotech and go even faster ...;) |
I'm looking at getting some wheels as well and see that some say for "sc10 front":confused: I thought they were the same size.
http://www.amainhobbies.com/product_...w-2-SC10-Front |
Thats for the 2wd. The 4wd uses the SCTE and slash protrac offset.
|
Originally Posted by Evil Genius jr.
(Post 10100869)
Thats for the 2wd. The 4wd uses the SCTE and slash protrac offset.
|
Those are not hex wheels either............they use bearings.
|
Originally Posted by thebizz
(Post 10100348)
Marcus do run the b44 mount with the exotek chassis or the stock chassis
|
Do you have pictures of your rcshox saddles installed?
|
Originally Posted by Evil Genius jr.
(Post 10100925)
Do you have pictures of your rcshox saddles installed?
http://i770.photobucket.com/albums/x...1-13122318.jpg http://i770.photobucket.com/albums/x...1-13133440.jpg the kit will be back on the site in a day or so, i am re-doing the site for the new year. |
Sweet thanks!
|
Originally Posted by CoyoteSlash
(Post 10100664)
There is nothing. wrong with running Stick packs. I think i'm one of the last guys running sticks at this point. (who's got more than 250.00 additional added to Truck) and I handle, balance, and lap Losi's just fine. Stick with what you've got and upgrade the Truck with some FT shocks or something for the price of getting a saddle pack or two.
Saddles can always come much later. Driving is always superior to any upgrade. I didn't have the yellow front springs though, and I was running the 1410. Made for a front heavy truck so.... I went back to the sticks, and I'm running a 5oz weight on the other side for counter balance. |
Originally Posted by MantisWorx
(Post 10099296)
Second wave of center dif pre-orders is up now.
|
Originally Posted by Vegatron75
(Post 10100963)
Still using the stick, tried the saddles and didn't like it.
I didn't have the yellow front springs though, and I was running the 1410. Made for a front heavy truck so.... I went back to the sticks, and I'm running a 5oz weight on the other side for counter balance. |
Man those Exoteks look nice but.....Im not sure their a $100 nice..
|
Heres my chassis brace:
https://lh3.googleusercontent.com/-0...4/DSC_0239.JPG https://lh4.googleusercontent.com/-D...4/DSC_0240.JPG https://lh4.googleusercontent.com/-n...4/DSC_0241.JPG Ugly but functional :), AL tube with shock ends threaded onto steel links which are gorilla glued into tube. For some reason my truck in now much quieter :weird: |
Originally Posted by MantisWorx
(Post 10100920)
the b44 conversion will not work with the Exotek chassis unless you drill holes. as far as i know you can either use the Exotek saddle conversion or RCshox. the Exo version lays them side by side (which i dont like at all) and the RCshox mounts them inline.
|
| All times are GMT -7. It is currently 12:02 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.