Losi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread
#8071
Tech Addict
iTrader: (4)
+1 anytime I posted anything useful pertaining to the truck, it was overshadowed by to stupid posting that was going on. I run AE, but I'm by no means a fan boy. I'm even thinkin about buying a 22 after I get my sc10. I like coming to this thread to learn about this truck and read what EDUCATED people have to say.
#8072
Heres the new painted body with front grill and head light stickers!
#8074
Went to the track today to test out the CC 3800 4 pole. All I have to say is WOW! I can't believe I haven't been running this motor from the beginning. Loads of torque down low and I had it geared at 18t. The motor never temper above 140 at this gearing and I was consistently running 10 minutes. I must have done at least 5 sessions with a break time of 15 minutes between each session. Running with a 2S and ESC is my Tekin RX8, with 0 timing and zero (min) on the current limiter. I followed someones advice here and used 1 on the push control and never had any nose down issues on the jumps.
Thanks to all who suggested this motor. With the RX8 it's definitely a lethal combo. I haven't tried this motor with my MMP but I'm sure it'll react the same. Once I get the SC10 4x4, I will use the same exact motor combo. I sent my SC4X 5.5 to Tekin for repairs. Once I get it back it's going up for sale.
For those who haven't tried this motor, you're missing out
Thanks to all who suggested this motor. With the RX8 it's definitely a lethal combo. I haven't tried this motor with my MMP but I'm sure it'll react the same. Once I get the SC10 4x4, I will use the same exact motor combo. I sent my SC4X 5.5 to Tekin for repairs. Once I get it back it's going up for sale.
For those who haven't tried this motor, you're missing out
#8075
Went to the track today to test out the CC 3800 4 pole. All I have to say is WOW! I can't believe I haven't been running this motor from the beginning. Loads of torque down low and I had it geared at 18t. The motor never temper above 140 at this gearing and I was consistently running 10 minutes. I must have done at least 5 sessions with a break time of 15 minutes between each session. Running with a 2S and ESC is my Tekin RX8, with 0 timing and zero (min) on the current limiter. I followed someones advice here and used 1 on the push control and never had any nose down issues on the jumps.
Thanks to all who suggested this motor. With the RX8 it's definitely a lethal combo. I haven't tried this motor with my MMP but I'm sure it'll react the same. Once I get the SC10 4x4, I will use the same exact motor combo. I sent my SC4X 5.5 to Tekin for repairs. Once I get it back it's going up for sale.
For those who haven't tried this motor, you're missing out
Thanks to all who suggested this motor. With the RX8 it's definitely a lethal combo. I haven't tried this motor with my MMP but I'm sure it'll react the same. Once I get the SC10 4x4, I will use the same exact motor combo. I sent my SC4X 5.5 to Tekin for repairs. Once I get it back it's going up for sale.
For those who haven't tried this motor, you're missing out
#8077
I too have the MMP with a BEC. Does it have push control as well? I purchased the CC SCT combo (MMP and CC 2400 motor) a few months ago and I feel the 3800 runs smoother with my RX8 than the SCT combo I had. In fact the 3800 feels almost similar to a sensored motor which blew me away. I'm definitely a believer of the 3800 motor.
#8078
The 1410 is flat out ridiculous. It's got all the speed and torque you could want. It really is a little piece of wonder. I wouldn't run anything else (unless it's testing). Seriously, for the guys who think you have to have a "550" in this truck, think again. The 1410 will out power and out torque them. It's cheap as hell also.
#8079
RX8 ESC profiles
Not sure if this has been announced but.. Tekin has added a few Team drivers ESC profiles while running the SCTE!
#8080
Got home from work today to find a package from Horizon my Diff Pins are in!!!! So a tear down of my diffs are in the weekend plans!!! Any tips? I have never done this! Is it possible to just swap them leaving the stock grease in there? I have only had ball diffs on my rc's
#8081
Tech Master
iTrader: (48)
I run the 3800 in a FT T4 and it's insanely cool running, all that power and 2wd made me try the Castle Torque limiter post haste.
Anyway, I'm running a 1509 2000kv NEU and MMP w/BEC with 3s in my SC but the more I read abouut guys running the 1410 and 2s the more I'm thinking trying the motor out on 2s. I'm curious of the weight savings with the smaller mill and 2s packs ?
This thread in a spectacular source of info.
Anyway, I'm running a 1509 2000kv NEU and MMP w/BEC with 3s in my SC but the more I read abouut guys running the 1410 and 2s the more I'm thinking trying the motor out on 2s. I'm curious of the weight savings with the smaller mill and 2s packs ?
This thread in a spectacular source of info.
#8082
Give it a try. For 60.00, it's a no brain'er.
#8083
I run the 3800 in a FT T4 and it's insanely cool running, all that power and 2wd made me try the Castle Torque limiter post haste.
Anyway, I'm running a 1509 2000kv NEU and MMP w/BEC with 3s in my SC but the more I read abouut guys running the 1410 and 2s the more I'm thinking trying the motor out on 2s. I'm curious of the weight savings with the smaller mill and 2s packs ?
This thread in a spectacular source of info.
Anyway, I'm running a 1509 2000kv NEU and MMP w/BEC with 3s in my SC but the more I read abouut guys running the 1410 and 2s the more I'm thinking trying the motor out on 2s. I'm curious of the weight savings with the smaller mill and 2s packs ?
This thread in a spectacular source of info.
there are a few other easy items I can shave off a few more oz with I may go for, but I'm pretty close to done messing.
#8084
New in stock A-Arms for SCTE
Im from Dallas working in Albuquerque NM. this week and I went to a hobby shop here. And what did I find? Two pegs full of 10-T front and rear A-Arms "$9.99" ! They also had Shock re-build kits,Caps,Springs and Shock adjustment nuts.
I thought this might be helpful for you guys.
Big Boys Toys Unlimited
1735 Juan Tabo NE
Albuquerque NM 87112
USA
(505)-298-1023
I thought this might be helpful for you guys.
Big Boys Toys Unlimited
1735 Juan Tabo NE
Albuquerque NM 87112
USA
(505)-298-1023
#8085
Im from Dallas working in Albuquerque NM. this week and I went to a hobby shop here. And what did I find? Two pegs full of 10-T front and rear A-Arms "$9.99" ! They also had Shock re-build kits,Caps,Springs and Shock adjustment nuts.
I thought this might be helpful for you guys.
Big Boys Toys Unlimited
1735 Juan Tabo NE
Albuquerque NM 87112
USA
(505)-298-1023
I thought this might be helpful for you guys.
Big Boys Toys Unlimited
1735 Juan Tabo NE
Albuquerque NM 87112
USA
(505)-298-1023